Uniden BC125AT owner manual Search Options, Search Delay

Page 53

•To permanently lock out a frequency, press L/O twice quickly.

•To exit Quick Search, press Scan.

See also Search Options on page 53 for Delay, CTCSS/DCS settings, and locking out/reviewing/unlocking frequencies.

Search Options

Search Delay

This setting controls how many seconds the scanner waits after a transmission ends before resuming searching. If you select a minus delay time, the scanner stops on the transmission for the setting time and then automatically resumes scanning. (Default = 2 seconds)

1.Press Func then Pgm/E in Service, Custom, or Quick Search/Search Hold mode to view the Search menu.

2.Scroll to Set Delay and press Pgm/E.

3.Turn Scroll Control to select the delay time from the following options:

•-10 sec - resumes after 10 seconds.

•-5 sec - resumes after 5 seconds.

•0 sec - resumes immediately.

•1 sec - waits 1 second for a reply then resumes.

•2 sec - waits 2 seconds for a reply then resumes.

•3 sec - waits 3 seconds for a reply then resumes.

•4 sec - waits 4 seconds for a reply then resumes.

•5 sec - waits 5 seconds for a reply then resumes.

4.Press Pgm/E to save and return to previous menu.

53

Image 53

Contents BC125AT Owners Earphone Warning PrecautionsContents Programming Channels Weather Operation FCC Wants You To Know Scanning Legally Introduction Direct Access lets you directly access any channel Feature HighlightsPage Page Frequency Range USA Band Plan Step Mode Band Lower UpperIncluded with Your Scanner Scanning Basics Optional AccessoriesWhat is Scanning? Understanding Scanning What is Searching?What is CTCSS/DCS? Conventional Scanning Repeater Operation Simplex OperationService Search Banks Where To Learn MoreUnderstanding Banks Channel Storage BanksConnecting the Antenna Setting UP Your ScannerConnecting an Optional Antenna Connecting an Earphone/HeadphoneConnecting an Extension Speaker Powering the Scanner Adjusting the Belt ClipInstalling Rechargeable Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries USB Message Batt Meaning Scanner Type Cond Getting to Know the Scanner About Your ScannerClr PriWeather menu Hold FuncScan SrchPlay/Charge Turning On the ScannerPgm/E ProgrammingItem Meaning Look At The DisplayOnly mode Scan/Service Search/Custom Search/Close CallAdjusting the Volume Setting Up Your ScannerUsing the Scroll Control Knob Setting the Backlight Adjusting the SquelchAdjusting the Contrast Display/Charge menu Setting the Charging TimerSetting the Beep Tone Using the Keypad LockResetting the Scanner All Memory Clear displaysProgramming Channels Programming Channel Text Tags Setting CTCSS/DCS for a Channel Channel menu Setting Channel ModulationSetting the Priority Channel Deleting Channels Setting Channel DelayClearing a Bank Scanning Stored ChannelsPage Priority Scan Modes Locking Out Channels Manually Selecting a ChannelUnlocking Channels Unlock all Channels in Banks Currently Enabled for ScanTo Lock Out a Specific Channel Service Search Receive/Hold Modes Service Search ModeCustom Search Mode Frequency MHz Step kHz Custom Search Receive/Hold Modes Quick Search ModeQuick Search Receive/Hold Modes Search Options Search DelayProgramming Custom Search Ranges CTCSS/DCS SearchTurn Scroll Control to CTCSS/DCS Search and press Pgm/E Locking Out Search Frequencies Storing Found Search FrequenciesUnlocking Search Frequencies Close Call Using the Close Call FeatureClose Call Menu Close Call Only ModeSelecting Close Call Modes Page Set Close Call Bands Close Call Hits Bank Close Call AlertClose Call Delay Close Call CTCSS/DCS Search Weather OperationSearching for a Weather Broadcast Weather Alert Standby To exit Weather Alert Standby mode, press Scan Technical SpecificationsWeather Alert Priority Operating Temperature NFM 138.150 MHz 157.100 MHz Signal Noise Ratio nominal VHF Low Band 25.0050 MHz Rbrc Information Ctcss Frequencies ReferencesBirdies DSC CodesOne Year Limited Warranty WarrantyPage Procedure for Obtaining Performance of Warranty