When the scanning of all normal banks ends, the scanner scans a channel storage bank that is named Close Call Hits (if enabled). This is a storage bank that automatically stores found frequencies with any Close Call mode. You will see Close Call Hits on the display. If the Close Call Hits bank is empty, the scanner does not scan this bank.
In Scan mode, the upper line displays the current channel bank number and the lower line displays and scrolls SCAN from right to left with the direction indicator (↑or ↓).
Enabled scan banks appear on the lowest line. Disabled scan bank numbers are not displayed. The currently scanned bank number flashes.
•You can turn scan banks on/off by pressing
•If you want to change the search direction or if it is a long transmission and you want to continue scanning, turn the Scroll Control or press Scan.
When the scanner finds a transmission, it stops on it. When the transmission ends, the scanner resumes scanning according to the delay setting for each channel.
•To hold on a channel, press Hold.
•To step through the channels, turn the Scroll Control in Hold mode. Press Hold to resume.
While monitoring a transmission, the upper line displays the current bank and bank channel number (or name if tagged) and the lower line displays the channel number in the scanner and frequency with the direction indicator (↑or ↓).
44