Uniden BC125AT owner manual Turn Scroll Control to CTCSS/DCS Search and press Pgm/E

CTCSS/DCS Search

This setting controls whether the scanner will search for a subaudible tone when it stops on a transmission during a Service Search. (Default = On)

1.Press Func then Pgm/E in any Service, Custom, or Quick Search/Search Hold mode to view the Search menu.

2.Turn Scroll Control to CTCSS/DCS Search and press Pgm/E.

3.Turn Scroll Control to select one of the following settings:

•Search Off

•Search On

4.Press Pgm/E to save and return to previous menu.

Programming Custom Search Ranges

You can define each search range used during a Custom Search.

1.Press Func then Pgm/E in Custom Search mode to view the Search menu.

2.Turn Scroll Control to Program Limits and press Pgm/E.

3.Turn Scroll Control to Search Bank 1-10and press Pgm/E. You will see the previously programmed lower frequency. At Lower, press Pgm/E and use the keypad to enter the lower limit frequency then press Pgm/E.

4.Scroll to Upper and press Pgm/E. You will see the previously programmed upper frequency. Use the keypad to enter the upper limit frequency then press Pgm/E.

54