Uniden BC125AT owner manual Scan/Service Search/Custom Search/Close Call, Only mode

Page 31

Item Meaning

2	• Scan in Scan mode.
	• CC Search in Close Call Only mode.
	• Channel Number and Frequency.
	• Searching Frequency.
3		identifies a Priority channel.
4	• BNK/SVC/SRC/BND shows banks/bands enabled for
	Scan/Service Search/Custom Search/Close Call
	Only mode.
	•	is for the Close Call Hits bank.
5	AM/FM/NFM shows channel/frequency modulation.
6	• PRI indicates Priority Scan.
	•	indicates Priority Do-Not-Disturb.
	• PRI+ indicates Priority Plus Scan.
7	Shows any CTCSS/DCS tone/code received.
8	WX indicates Weather Priority is on.
9	•	indicates Close Call Priority.
	•	indicates Close Call Do-Not-Disturb.
10	↑or ↓ indicates the scan/search direction.
11	BATT	indicates the batteries are low.
12		indicates the key lock is enabled.
13		indicates the signal strength.
		indicates the signal strength.
14	• TL/O indicates temporary lock out.
	• L/O indicates permanent lock out.

31

Image 31

Contents

BC125AT Owners Earphone Warning PrecautionsContents Programming Channels Weather Operation FCC Wants You To Know Scanning Legally Introduction Direct Access lets you directly access any channel Feature HighlightsPage Page Frequency Range USA Band Plan Step Mode Band Lower UpperIncluded with Your Scanner What is Scanning? Optional AccessoriesScanning Basics What is CTCSS/DCS? What is Searching?Understanding Scanning Conventional Scanning Repeater Operation Simplex OperationChannel Storage Banks Where To Learn MoreService Search Banks Understanding BanksConnecting the Antenna Setting UP Your ScannerConnecting an Extension Speaker Connecting an Earphone/HeadphoneConnecting an Optional Antenna Powering the Scanner Adjusting the Belt ClipInstalling Rechargeable Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries USB Message Batt Meaning Scanner Type Cond Getting to Know the Scanner About Your Scanner Weather menu Pri Clr Srch FuncHold ScanProgramming Turning On the ScannerPlay/Charge Pgm/EItem Meaning Look At The DisplayOnly mode Scan/Service Search/Custom Search/Close CallUsing the Scroll Control Knob Setting Up Your ScannerAdjusting the Volume Setting the Backlight Adjusting the SquelchAdjusting the Contrast Display/Charge menu Setting the Charging TimerAll Memory Clear displays Using the Keypad LockSetting the Beep Tone Resetting the ScannerProgramming Channels Programming Channel Text Tags Setting CTCSS/DCS for a Channel Channel menu Setting Channel ModulationSetting the Priority Channel Deleting Channels Setting Channel DelayClearing a Bank Scanning Stored ChannelsPage Priority Scan Modes Locking Out Channels Manually Selecting a ChannelTo Lock Out a Specific Channel Unlock all Channels in Banks Currently Enabled for ScanUnlocking Channels Service Search Receive/Hold Modes Service Search ModeCustom Search Mode Frequency MHz Step kHz Custom Search Receive/Hold Modes Quick Search ModeQuick Search Receive/Hold Modes Search Options Search DelayTurn Scroll Control to CTCSS/DCS Search and press Pgm/E CTCSS/DCS SearchProgramming Custom Search Ranges Locking Out Search Frequencies Storing Found Search FrequenciesUnlocking Search Frequencies Close Call Using the Close Call FeatureSelecting Close Call Modes Close Call Only ModeClose Call Menu Page Set Close Call Bands Close Call Hits Bank Close Call AlertClose Call Delay Searching for a Weather Broadcast Weather OperationClose Call CTCSS/DCS Search Weather Alert Standby Weather Alert Priority Technical SpecificationsTo exit Weather Alert Standby mode, press Scan Operating Temperature NFM 138.150 MHz 157.100 MHz Signal Noise Ratio nominal VHF Low Band 25.0050 MHz Rbrc Information Ctcss Frequencies ReferencesBirdies DSC CodesOne Year Limited Warranty WarrantyPage Procedure for Obtaining Performance of Warranty