Uniden BC125AT owner manual Setting the Charging Timer, Display/Charge menu

Page 35

4.When you have selected a setting, press Pgm/E to set it and return to the previous menu.

5.Press .. Clr to exit.

Setting the Charging Timer

The Charging Timer menu is also a submenu of the Display/ Charge menu. It sets how long the scanner will charge the batteries when you plug the supplied USB cable into a USB port and connect it to your scanner.

WARNING: The Charging Timer will reset to the set charging time every time you plug the USB cable into the scanner or charge the batteries while the USB cable is connected..

1.To set the Charging Timer press Func then to view the

Display/Charge menu.

2.Scroll to Set ChargeTime and press Pgm/E.

3.Scroll to 1-16 (hours) (default = 14 hours) and press Pgm/E to save and return to the previous menu.

Suggested maximum charging time for Ni-MH batteries:

1500mAh	9 hours

1800mAh	11 hours

2000mAh	12 hours
2100mAh	13 hours

2200mAh	13 hours

2300mAh	14 hours
2500mAh	15 hours

35

Image 35

Contents

BC125AT Owners Earphone Warning PrecautionsContents Programming Channels Weather Operation FCC Wants You To Know Scanning Legally Introduction Direct Access lets you directly access any channel Feature HighlightsPage Page Frequency Range USA Band Plan Step Mode Band Lower UpperIncluded with Your Scanner Scanning Basics Optional AccessoriesWhat is Scanning? Understanding Scanning What is Searching?What is CTCSS/DCS? Conventional Scanning Repeater Operation Simplex OperationChannel Storage Banks Where To Learn MoreService Search Banks Understanding BanksConnecting the Antenna Setting UP Your ScannerConnecting an Optional Antenna Connecting an Earphone/HeadphoneConnecting an Extension Speaker Powering the Scanner Adjusting the Belt ClipInstalling Rechargeable Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries USB Message Batt Meaning Scanner Type Cond Getting to Know the Scanner About Your ScannerClr PriWeather menu Srch FuncHold ScanProgramming Turning On the ScannerPlay/Charge Pgm/EItem Meaning Look At The Display Only mode Scan/Service Search/Custom Search/Close CallAdjusting the Volume Setting Up Your ScannerUsing the Scroll Control Knob Setting the Backlight Adjusting the SquelchAdjusting the Contrast Display/Charge menu Setting the Charging TimerAll Memory Clear displays Using the Keypad LockSetting the Beep Tone Resetting the ScannerProgramming Channels Programming Channel Text Tags Setting CTCSS/DCS for a Channel Channel menu Setting Channel ModulationSetting the Priority Channel Deleting Channels Setting Channel DelayClearing a Bank Scanning Stored ChannelsPage Priority Scan Modes Locking Out Channels Manually Selecting a ChannelUnlocking Channels Unlock all Channels in Banks Currently Enabled for ScanTo Lock Out a Specific Channel Service Search Receive/Hold Modes Service Search ModeCustom Search Mode Frequency MHz Step kHz Custom Search Receive/Hold Modes Quick Search ModeQuick Search Receive/Hold Modes Search Options Search DelayProgramming Custom Search Ranges CTCSS/DCS SearchTurn Scroll Control to CTCSS/DCS Search and press Pgm/E Locking Out Search Frequencies Storing Found Search FrequenciesUnlocking Search Frequencies Close Call Using the Close Call FeatureClose Call Menu Close Call Only ModeSelecting Close Call Modes Page Set Close Call Bands Close Call Hits Bank Close Call AlertClose Call Delay Close Call CTCSS/DCS Search Weather OperationSearching for a Weather Broadcast Weather Alert Standby To exit Weather Alert Standby mode, press Scan Technical SpecificationsWeather Alert Priority Operating Temperature NFM 138.150 MHz 157.100 MHz Signal Noise Ratio nominal VHF Low Band 25.0050 MHz Rbrc Information Ctcss Frequencies ReferencesBirdies DSC CodesOne Year Limited Warranty WarrantyPage Procedure for Obtaining Performance of Warranty