Custom Search Receive/Hold Modes
To hold on a frequency, press Hold. To step through the frequencies, turn Scroll Control in Hold mode. Press Hold to resume searching.
While monitoring a transmission, the upper line displays the current search bank name and the lower line displays the current frequency with the direction indicator (↑or ↓)
The modulation, Priority mode icon (if priority is enabled), any CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or
Numbers at the bottom of the display show the enabled service search banks. The currently searched bank number flashes in Receive mode.
•To store a frequency, press Pgm/E; see Storing Found Search Frequencies on page 55.
•To temporarily lock out a frequency, press L/O.
•To permanently lock out a frequency, press L/O twice quickly.
See also Search Options on page 53 for Delay, CTCSS/DCS settings, and locking out/reviewing/unlocking frequencies.
Quick Search Mode
Quick Search mode allows you to enter a frequency and start searching up or down from that frequency from any Hold mode (except Close Call Only/Weather Hold).
To start a Quick Search in Scan or Search mode, press Hold to hold on any channel or frequency. Enter the new frequency (include a decimal point so you don’t go to a channel) and press Hold again to set the frequency.
51