2.Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)
3.Scroll to select Edit Tag and press Pgm/E.
4.Turn Scroll Control to choose the characters, pressing > or < to move the cursor to the right or left. If you make a mistake, press .. Clr to clear the last character. Press .. Clr twice to clear all characters. To cancel and exit, press L/O.
5.Press Pgm/E to save the tag and return to the Channel menu.
Setting CTCSS/DCS for a Channel
You can store a CTCSS tone or DCS code, set the scanner to search for tones/codes, have the scanner open squelch on any tone/code, or have the squelch only open if no CTCSS/DCS is detected for any channel. (Default = Off)
1.To select a channel, press Hold and then enter the channel number.
2.Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)
3.Scroll to select Set CTCSS/DCS and press Pgm/E.
4.Scroll to select one of the following options:
•Off - the scanner ignores all tones and opens squelch on any signal
39