Aastra Telecom 41-001286-00 manual Changing the Message Tone, Changing the Keypad Sound

Page 39

3.Select Audio settings, and press OK z.

4.Select Ringer volume, and press OK z.

5.Use the navigation keys to adjust the volume, and press OK z.

Changing the Message Tone

You can set a tone that notifies you of a message waiting on your phone. You can also disable message tones if required.

To set a message tone on your phone do the following.

1.In Idle mode, press OK z to display the Main Menu.

2.Select Settings and press OK z.

3.Select Audio settings, and press OK z.

4.Select Message tone, and press OK z.

5.Select a tone from the list that notifies you of messages on your phone.

You can scroll through the list of tones using the navigation keys and hear a sample of the tone by pressing the Play softkey. To disable message tones, select Silent. For available tones, see the table below.

6. Press OK z.

	Message Tones

Base ramp		Little bell

Crazy echo		X-low

Echo		Silent

Changing the Keypad Sound

When you press the keys on the keypad, a default tone is audible. You can change this tone or disable it if required. To change the keypad sound:

1.In Idle mode, press OK z to display the Main Menu.

2.Select Settings and press OK z.

3.Select Audio settings, and press OK z.

4.Select Keypad sound, and press OK z.

5.Select a sound from the list that you want to hear when you press the keypad.

You can scroll through the list of sounds using the navigation keys. To disable keypad sounds, select Silent.

6. Press OK z.

For available sounds, see the following table.

	Keypad Sounds

Silent		Dimp

Ditter		Pip

Doomp

Customizing Your Phone

Aastra MBU 400 User Guide

39

Image 39

Contents MBU 400TM Page Table of Contents Table of ContentsManaging Calls Important Safety Instructions Important Safety InstructionsImportantes mesures de sécurité Software License Agreement Software License AgreementFCC Information FCC InformationConsumer Information US Service CenterApplicable for Coin or Pay Phone Only Safety Information Safety InformationFor countries outside the European Union Battery Disposal InformationPage About This Guide About This GuideDocumentation Introduction FeaturesMBU Features Call and Telephony FeaturesAastra 420d Handset Features Other MBU FeaturesDisplay Other Handset Features Audio FeaturesRequirements Installation and SetupGetting Started Getting StartedMBU Gateway Call Registering the 420d HandsetKeys Key Description 420d Handset Key DescriptionsIP address of your phone system MBU 400 IP Address and System StatusConfiguring Your Phone for First-Time Use StartedGetting Specify the Domain and the SIP proxy Configuring the Phone Using the HandsetGetting Started Handset Idle Screen Using the 420d HandsetUsing the 420d Handset Idle Mode OptionsMain Menu Handset Main MenuUsing the Speakerphone Using the Volume ControlChanging the PIN Code for VoIP Settings Changing the Access CodeLocking/Unlocking the Keypad Changing the Access Code on the Handset Changing the Access Code on the GatewayChanging the Handset Name Entering Text, Numbers, and SymbolsCustomizing Your Phone Customizing Your PhoneInput Symbols Text Input ModesInput Characters Reaching the Language List Directly Setting Time and DateAutomatic Time/Date Settings Specifying a Language on the HandsetSetting Time Manually Setting Date ManuallyChanging Time Format Changing Time Zone Changing Date FormatSetting Daylight Saving Time DST Specifying the Primary Line for Outgoing CallsChoosing VoIP or Landline Specifying Call Groups Changing the Display ContrastChoosing SIP Account Setting Do Not Disturb Setting Call WaitingSetting Audio Resetting the Handset Changing the Ringer VolumeChanging the Ringer Melody Changing the Keypad Sound Changing the Message ToneEnabling/Disabling Silent Mode Setting Your Phone to VibrateChanging Advisory Tones Changing Emergency Line Settings Making a VoIP Call over the Internet Making and Answering CallsMaking and Answering Calls VoIP CallsLandline Calls Intercom CallsMaking a Landline Call Calling a Contact on the Primary Line Calling from the Contacts ListMaking an Intercom Call Calling All HandsetsCalling from the Call Log Calling a Contact on a Secondary LineCalling from the Call Log on the Primary Line Redialing on a Secondary Line Calling Using RedialCalling from the Call Log on a Secondary Line Redialing on a Primary LineAnswering Calls Calling Using SpeeddialCaller ID Any Key Answer ModeMaking Emergency Calls Calling with a Call on Hold Handling CallsHandling Calls Placing a Call on HoldTransferring a Call Muting/Unmuting a CallSwapping Calls Conferencing CallsTransferring to a Contacts List Number Transferring CallsTransferring to another Handset Transferring to a VoIP or LandlineEnding Calls Managing Calls Managing CallsContacts List Editing a Contact Adding a ContactChanging the Default Number for a Contact Deleting a ContactDeleting All Contacts Creating a Speeddial for a Contact Groups of ContactsCreating a Contact Group Call Log Viewing Entries in the Call LogAdding a Contact to a Group Voicemail Manually Registering/De-registering a Handset Additional FeaturesAdditional Features Resetting the MBUChanging Internet Settings Updating the MBU 400 System FirmwareUpdating the Firmware Troubleshooting TroubleshootingIssue Causes Solution There is no audio when I make Issue Causes Solution Cannot make Internet calls, but it After Warranty Service Limited WarrantyLimited Warranty Warranty Repair ServicesPage Any key answer mode Index SIP Page