Aastra Telecom 41-001286-00 manual Started, Getting, Configuring Your Phone for First-Time Use

Page 22

Started

The message "Connecting... Please wait" appears on the handset, followed shortly by the MBU status screen.

2. Scroll down to see the IP address and other MBU status information.

Getting

MAC Address IP Address

System Status

--Network--

MAC Address

00-08-7g-98-45-cf

IP address

192.345.43.54 (D)

Boot Status

Failed

--Gateway--

Version

Sw: 01:08 Hw: 1 Serial no.

255

Handset ID

0280000002340

--VoIP status--

VoIP register domain

Registration

SIP1:Registered

SIP2: Not registered

SIP3: Not registered

SIP4: Not registered

SIP5: Not registered

SIP6: Not registered

SIP7: Not registered

SIP8: Not registered

--EMS status--

EMS server Registration Failed

--RTP packets--

Received

No

3. Press the red key	to exit.
	CLR

Note: If the MBU did not download a configuration file or did not receive an IP address using DHCP, a Boot Status of "Failed" appears on the System Status page. If your MBU 400 system is not using configuration files, for example, the Boot Status will be "Failed" under normal operation.

Configuring Your Phone for First-Time Use

This section describes how to configure and set up your MBU 400 phone for first use. If your MBU 400 System has been pre-configured by the Internet Telephony Service Provider you purchased it from, the phone is ready for use once you have plugged in all cables and connected the power. You can customize your phone using the information provided in Customizing Your Phone on page 30.

The MBU 400 phone functions much like an ordinary analog telephone. However, because it is connected to the Internet, you have to configure your phone before it is ready for first use. The initial configuration may have already been done for you by your System Administrator.

22	Aastra MBU 400 User Guide

Image 22

Contents MBU 400TM Page Table of Contents Table of ContentsManaging Calls Important Safety Instructions Important Safety InstructionsImportantes mesures de sécurité Software License Agreement Software License AgreementFCC Information FCC InformationUS Service Center Consumer InformationApplicable for Coin or Pay Phone Only Safety Information Safety InformationBattery Disposal Information For countries outside the European UnionPage About This Guide About This GuideDocumentation Call and Telephony Features FeaturesMBU Features IntroductionOther MBU Features Aastra 420d Handset FeaturesDisplay Audio Features Other Handset FeaturesInstallation and Setup RequirementsGetting Started Getting StartedMBU Gateway Registering the 420d Handset Call420d Handset Key Descriptions Keys Key DescriptionMBU 400 IP Address and System Status IP address of your phone systemStarted Configuring Your Phone for First-Time UseGetting Configuring the Phone Using the Handset Specify the Domain and the SIP proxyGetting Started Idle Mode Options Using the 420d HandsetUsing the 420d Handset Handset Idle ScreenHandset Main Menu Main MenuUsing the Volume Control Using the SpeakerphoneChanging the Access Code Changing the PIN Code for VoIP SettingsLocking/Unlocking the Keypad Changing the Access Code on the Gateway Changing the Access Code on the HandsetCustomizing Your Phone Entering Text, Numbers, and SymbolsCustomizing Your Phone Changing the Handset NameText Input Modes Input SymbolsInput Characters Specifying a Language on the Handset Setting Time and DateAutomatic Time/Date Settings Reaching the Language List DirectlySetting Date Manually Setting Time ManuallyChanging Time Format Changing Date Format Changing Time ZoneSpecifying the Primary Line for Outgoing Calls Setting Daylight Saving Time DSTChoosing VoIP or Landline Changing the Display Contrast Specifying Call GroupsChoosing SIP Account Setting Call Waiting Setting Do Not DisturbSetting Audio Changing the Ringer Volume Resetting the HandsetChanging the Ringer Melody Changing the Message Tone Changing the Keypad SoundSetting Your Phone to Vibrate Enabling/Disabling Silent ModeChanging Advisory Tones Changing Emergency Line Settings VoIP Calls Making and Answering CallsMaking and Answering Calls Making a VoIP Call over the InternetIntercom Calls Landline CallsMaking a Landline Call Calling All Handsets Calling from the Contacts ListMaking an Intercom Call Calling a Contact on the Primary LineCalling a Contact on a Secondary Line Calling from the Call LogCalling from the Call Log on the Primary Line Redialing on a Primary Line Calling Using RedialCalling from the Call Log on a Secondary Line Redialing on a Secondary LineCalling Using Speeddial Answering CallsAny Key Answer Mode Caller IDMaking Emergency Calls Placing a Call on Hold Handling CallsHandling Calls Calling with a Call on HoldConferencing Calls Muting/Unmuting a CallSwapping Calls Transferring a CallTransferring to a VoIP or Landline Transferring CallsTransferring to another Handset Transferring to a Contacts List NumberEnding Calls Managing Calls Managing CallsContacts List Adding a Contact Editing a ContactDeleting a Contact Changing the Default Number for a ContactDeleting All Contacts Groups of Contacts Creating a Speeddial for a ContactCreating a Contact Group Viewing Entries in the Call Log Call LogAdding a Contact to a Group Voicemail Resetting the MBU Additional FeaturesAdditional Features Manually Registering/De-registering a HandsetUpdating the MBU 400 System Firmware Changing Internet SettingsUpdating the Firmware Troubleshooting TroubleshootingIssue Causes Solution There is no audio when I make Issue Causes Solution Cannot make Internet calls, but it Warranty Repair Services Limited WarrantyLimited Warranty After Warranty ServicePage Any key answer mode Index SIP Page