Maxon Telecom SP-200 Series, Synthesized Scanning Radio Scan Modes, Normal Channel Scan

Status Indicators and Audible Alert Tones

STATUS	DESCRIPTION	LED COLOR	LCD INDICATION	AUDIBLE TONE
Normal	Power On - Ready	N/ A	188	Melody
	Call Received	Orange	Channel Number	N/ A
	Correct Call	Green	Channel Number	N/ A
	Busy Channel	Orange	Channel Number	N/ A
	Transmit	Red	Channel Number	N/ A
	Transmit Not Allowed	Red Flashing	Alternating UL /	Two Beeps Repeated
			Channel Number
Scanning	Normal Scan Mode	Green Flashing	Group Number	N/ A
	Priority Scan Mode	Green Flashing	N/A	N/ A
	Priority Look Back	Green Flashing	PS/Channel	N/ A
	Scan Mode		number
Scan Edit	Edit Scan List	Red Single Flash	SE	N/ A
Priority	Edit Priority Channel	Red Two Flashes	PE	N/ A
Edit
Warning	Low Battery	Red Flashing	LC	3 Beeps Repeated
	Busy Channel Lockout	Orange	bL	Single Beep Repeated
	TX Inhibit	N/A	_h/rO	Two Beeps
	Time-Out-Timer	N/A	Pt	Single Beep / 3 Beeps
				Repeated
Error	EEPROM	N/A	Er	Single Beep Repeated
	Unlock	N/A	UL	Two Beeps Repeated

NOTE: All audible tones can be programmed "off" for silent operation.

Scan Modes

Scanning is a Dealer programmable feature that allows you to monitor a number of channels or channels within a Group. Your Dealer will help you define a scanning mode and your channel "scan list" .

Normal Channel Scan

Once the scan list has been established, initiate scan by pressing and releasing the scan button, (first button below the P-T-T bar).

If a conversation is detected on any of the channels in the scan list, the radio will stop on that channel and you will be able to hear the conversation. If programmed for normal scan TX, you will be able to transmit on that active channel during the programmable scan delay time. (The scan delay time

7