Priority Channel Edit

Maxon Telecom SP-200K Series operating instructions Priority Channel Edit

XVI. Scan List Edit, continued

Channel Group Edit, continued

red flash of the LED. The display will read SE. Release the scan button.

The first group number will be displayed. If you do not wish to edit the group you have selected press the I or J button to select the desired channel groups you wish to edit. After channel group selection has been made, press and release the scan button (first button below the P-T-T bar). The channel number within your selected channel group may now be edited.

If the channel number is flashing, that channel is already included in the scan list of the selected channel group. If the channel number is solid, the channel can be added or deleted from the scan list. Press and release the monitor button, (second button below the P-T-T bar), the selected channel will flash if it was added to the scan list or be solid if it was deleted from the scan list.

To edit other channels, press the I or J buttons to select the desired channel within the channel group. To add or delete the newly selected channel from the channel group scan list, repeat the process detailed above. Upon completion of editing channels on your channel group scan list, press and release the scan button, (first button below the P-T-T bar). Your new channel group scan list should be entered at this time.

Only one priority channel can be programmed into the radio. To edit a priority channel, turn the radio off, press and hold scan button (first button below the P-T-T bar). While holding the scan button, turn radio on, and release the scan button after the second red flash of the LED. PE will be shown in the display. Release the scan button. The first channel number will be displayed. If displayed channel is not your priority channel, press and release the I or J button to select the desired priority channel.

After you have selected the channel, a flashing channel number indicates that the channel is already selected as priority. If channel number is solid, the channel is not selected as priority. To add or delete the selected channel as the priority channel, press and release the monitor button, (second button below the P-T-T bar). The selected channel will flash if it was added as a priority channel or will be solid if deleted as the priority.

Upon completion of adding or deleting the priority channel, press and release the scan button. Your new priority channel should be entered at this time.