Uniden EXA3955 manual Connect the base unit

Page 10

!

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

note

The handset can be placed face up or face down in the base

for charging.

tip

If your telephone outlet isn’t modular, contact your telephone company for assistance.

C. Connect the base unit

1 Connect the AC adapter to the

DC IN 9V jack and a standard 120V AC wall outlet.

2 Set the base on a desk or tabletop, Pull back stand out for base support and place the handset on the base unit as shown.

3Raise the antenna to a vertical position.

4Make sure the status LED lights. If the LED does not light, check to see that the AC adapter is plugged in.

	note	• Use only the supplied AC adapter. Do not use any other AC adapter.
	note	• Connect the AC adapter to a continuous power supply.
		• Connect the AC adapter to a continuous power supply.

5Connect the telephone line cord to the TEL LINE jack

and a telephone outlet once the handset is fully charged.

Modular

				Digital
				Spread Spectrum
		talk
	1		2	fla hs
	4		2	3
	4	5		3
7		5		6
7	8			6
	8		9

0

#

7

4 qp sr

g

0

1

ih

8

oper

5

tuv

2abc jkl

9 #

6

3 mn o

de f

[ 8 ] G E T T I N G S TA R T E D

Image 10

Contents Page Page Contents Welcome FeaturesExplanation purposes Controls and Functions N T R O L S a N D F U N C T I O N SFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Battery use time per charge Install the battery packLow battery alert Connect the base unit Base Setting only Choose the dialing modePress and hold flash/set until you hear a confirmation tone Setting the handset retainer clip for wall mounting Standard wall plate mountingDirect wall mounting Handset On the Base Making and Receiving CallsFrom the Handset From the Base Handset Off the BaseEarpiece volume Adjusting the Base RingerRinger tone and volume RedialTraveling Out-of-Range Flash and Call WaitingStoring Phone Numbers With the HandsetFrom the Memory Location Making Calls with Memory DialingWith the Base From the One-touch Priority DialErasing Stored Numbers Press talk keyWhen speaking on the base When speaking on the handsetWay Conferencing Intercom from the handset to base Intercom/Page FeatureIntercom from the base to the handset Base. The handset beeps. If no answer, pressTo transfer from the handset to the base Call Transfer FeatureTo transfer from the base to the handset Mute Handset/Base Chain DialingSelecting a Different Channel Tone Dialing Switch-over Integrated Answering Device Using the Menu Mode Setting up your Answering SystemTurning the Answering System On/Off Recording a personal outgoing message Greeting Setting Your Outgoing Message GreetingPreset message Choosing between the two outgoing messagesSetting the Time To select the minuteSetting a Personal Security Code Four times Setting the base ringer volumeAdjusting the speaker volume level You hear the current ringer option HighSetting the Ring Time Announce only feature Selecting the message record timeUsing your Answering System Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memoRecording a conversation Remote access away from homeTo stop recording, press or memo/rec You may select a command from the following chart CommandTurn on the answering system remotely Changing the Digital Security Code Changing the Face Plate Headset InstallationTo remove the Face plate To attach the Face plate Installing the Beltclip MaintenanceBattery replacement and handling Power FailureTroubleshooting SymptomSymptom Suggestion General Information Battery InformationAC Adapter Information Precautions Installation Considerations Index G, HRemote access away from home Remote Operation CardTask Key At Uniden, we’ll take care of you