Uniden EXA3955 manual Install the battery pack, Battery use time per charge, Low battery alert

Page 9

B. Install the battery pack

Place the handset on the base unit and charge the battery pack for at least 15-20 hours before plugging the phone line into your phone.

Battery use time (per charge)

From fully charged:

•6 hours continuous use.

•10 days when the handset is in the standby mode.

Low battery alert

If the phone is not in use, talk/low batt LED flashes on the LCD and none of the keys will operate. If the phone is in use, talk/low batt LED flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit

for charging.

note

•Use only the Uniden Battery supplied with your phone. Replacement batteries are also available through the Uniden Parts Department (See page 43) or www.uniden.com

•Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after each telephone call.

•If you must replace the battery pack during a telephone call, complete the replacement of the battery pack within 30 seconds, and you can return to the original call.

G E T T I N G S T A R T E D

G E T T I N G S TA R T E D [ 7 ]

Image 9

Contents Page Page Contents Features WelcomeExplanation purposes N T R O L S a N D F U N C T I O N S Controls and FunctionsFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Setting up the Phone Do the following stepsChoose the best location Install the battery pack Battery use time per chargeLow battery alert Connect the base unit Choose the dialing mode Base Setting onlyPress and hold flash/set until you hear a confirmation tone Standard wall plate mounting Setting the handset retainer clip for wall mountingDirect wall mounting From the Handset From the Base Making and Receiving CallsHandset On the Base Handset Off the BaseRinger tone and volume Adjusting the Base RingerEarpiece volume RedialFlash and Call Waiting Traveling Out-of-RangeWith the Handset Storing Phone NumbersWith the Base Making Calls with Memory DialingFrom the Memory Location From the One-touch Priority DialPress talk key Erasing Stored NumbersWhen speaking on the handset When speaking on the baseWay Conferencing Intercom from the base to the handset Intercom/Page FeatureIntercom from the handset to base Base. The handset beeps. If no answer, pressCall Transfer Feature To transfer from the handset to the baseTo transfer from the base to the handset Chain Dialing Mute Handset/BaseSelecting a Different Channel Tone Dialing Switch-over Integrated Answering Device Setting up your Answering System Using the Menu ModeTurning the Answering System On/Off Preset message Setting Your Outgoing Message GreetingRecording a personal outgoing message Greeting Choosing between the two outgoing messagesTo select the minute Setting the TimeSetting a Personal Security Code Adjusting the speaker volume level Setting the base ringer volumeFour times You hear the current ringer option HighSetting the Ring Time Selecting the message record time Announce only featurePlaying your messages Using your Answering SystemSkipping a message Repeating a messageVoice memo Deleting a messageRemote access away from home Recording a conversationTo stop recording, press or memo/rec Command You may select a command from the following chartTurn on the answering system remotely Changing the Digital Security Code Headset Installation Changing the Face PlateTo remove the Face plate To attach the Face plate Maintenance Installing the BeltclipPower Failure Battery replacement and handlingSymptom TroubleshootingSymptom Suggestion Battery Information General InformationAC Adapter Information Precautions Installation Considerations G, H IndexRemote Operation Card Remote access away from homeTask Key At Uniden, we’ll take care of you