Uniden EXA3955 manual Turning the Answering System On/Off, Setting up your Answering System

Page 26

Turning the Answering System On/Off

status

ans. on/off

memo/rec delete

mute/menu redial/p memory flash/set

1 To turn the answering system on, press ans on/off. . The current greeting message will be played and you will hear a tone. The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you.

2 To turn the answering system off, press ans on/off. . After the announcement “Answer off” the message counter display will no longer be illuminated.

note

For your convenience, voice prompts will guide you through the menu setup mode.

Setting up your Answering System

Using the Menu Mode

The Menu mode allows you to set the following Answering System functions.

mute/menu

• To scroll through the menu options, repeatedly press

mute/menu . The system returns to standby after the

"Greeting Message"

mute/menu

last menu option. A confirmation tone sounds to

"Time"

indicate standby mode.

mute/menu

• If any of the following occurs during menu setup, the

 

"Security Code"

handset returns to standby. Start over with menu

mute/menu

function prior to the interruption.

 

"Ringer Volume"

-Press talk

mute/menu

-Press

 

 

 

 

"Ring Time"

 

 

 

-20 seconds lapse of time

 

mute/menu

• The idle time default setting is 20 seconds. If the

"Record Time"

handset remains idle for 20 seconds, an error tone

 

mute/menu

sounds and the system returns to standby.

Return to standby

• You can use volume ▲/▼ to adjust the announcement

(tone sounds).

 

volume level during a voice prompt/guidance.

[ 24 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E

Image 26
Contents Page Page Contents Explanation purposes FeaturesWelcome Controls and Functions N T R O L S a N D F U N C T I O N SFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Low battery alert Install the battery packBattery use time per charge Connect the base unit Press and hold flash/set until you hear a confirmation tone Choose the dialing modeBase Setting only Setting the handset retainer clip for wall mounting Standard wall plate mountingDirect wall mounting Handset On the Base Making and Receiving CallsFrom the Handset From the Base Handset Off the BaseEarpiece volume Adjusting the Base RingerRinger tone and volume RedialTraveling Out-of-Range Flash and Call WaitingStoring Phone Numbers With the HandsetFrom the Memory Location Making Calls with Memory DialingWith the Base From the One-touch Priority DialErasing Stored Numbers Press talk keyWay Conferencing When speaking on the handsetWhen speaking on the base Intercom from the handset to base Intercom/Page FeatureIntercom from the base to the handset Base. The handset beeps. If no answer, pressTo transfer from the base to the handset Call Transfer FeatureTo transfer from the handset to the base Selecting a Different Channel Chain DialingMute Handset/Base Tone Dialing Switch-over Integrated Answering Device Turning the Answering System On/Off Setting up your Answering SystemUsing the Menu Mode Recording a personal outgoing message Greeting Setting Your Outgoing Message GreetingPreset message Choosing between the two outgoing messagesSetting the Time To select the minuteSetting a Personal Security Code Four times Setting the base ringer volumeAdjusting the speaker volume level You hear the current ringer option HighSetting the Ring Time Announce only feature Selecting the message record timeUsing your Answering System Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memoTo stop recording, press or memo/rec Remote access away from homeRecording a conversation You may select a command from the following chart CommandTurn on the answering system remotely Changing the Digital Security Code To remove the Face plate To attach the Face plate Headset InstallationChanging the Face Plate Installing the Beltclip MaintenanceBattery replacement and handling Power FailureTroubleshooting SymptomSymptom Suggestion AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations Index G, HRemote access away from home Remote Operation CardTask Key At Uniden, we’ll take care of you