Uniden EXA3955 Setting the handset retainer clip for wall mounting, Standard wall plate mounting

Page 12

Raise the antenna.

Mounting the Base Unit on a Wall

Setting the handset retainer clip for wall mounting

!

DO NOT use an outlet controlled by a

wall switch.

1 On the base unit, pull the handset retainer clip out of the slot and rotate it clockwise 180 degrees.

2 Flip the retainer clip from front to back. Slide it back into the slot so that the lip of the retainer is up and the ▼ is down. The retainer holds the handset

in place.

Standard wall plate mounting

Flip the hook tab over so the tab holds the handset.

This phone can be mounted on any standard wall plate.

1 Route the AC adapter cord inside the molded wiring channel as shown.

2 Plug the telephone line cord into the TEL LINE jack. Route the cord inside the molded wiring channel as shown.

3 Raise the antenna to a vertical position.

Single-Line Telephone Jack (RJ11C)

Telephone

Line Cord

Power Outlet (AC 120V, 60Hz)

AC Adapter

4 Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.

[ 10 ] G E T T I N G S TA R T E D

Image 12

Contents Page Page Contents Features WelcomeExplanation purposes Controls and Functions N T R O L S a N D F U N C T I O N SFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Setting up the Phone Do the following stepsChoose the best location Install the battery pack Battery use time per chargeLow battery alert Connect the base unit Choose the dialing mode Base Setting onlyPress and hold flash/set until you hear a confirmation tone Setting the handset retainer clip for wall mounting Standard wall plate mountingDirect wall mounting Making and Receiving Calls From the Handset From the BaseHandset On the Base Handset Off the BaseAdjusting the Base Ringer Ringer tone and volumeEarpiece volume RedialTraveling Out-of-Range Flash and Call WaitingStoring Phone Numbers With the HandsetMaking Calls with Memory Dialing With the BaseFrom the Memory Location From the One-touch Priority DialErasing Stored Numbers Press talk keyWhen speaking on the handset When speaking on the baseWay Conferencing Intercom/Page Feature Intercom from the base to the handsetIntercom from the handset to base Base. The handset beeps. If no answer, pressCall Transfer Feature To transfer from the handset to the baseTo transfer from the base to the handset Chain Dialing Mute Handset/BaseSelecting a Different Channel Tone Dialing Switch-over Integrated Answering Device Setting up your Answering System Using the Menu ModeTurning the Answering System On/Off Setting Your Outgoing Message Greeting Preset messageRecording a personal outgoing message Greeting Choosing between the two outgoing messagesSetting the Time To select the minuteSetting a Personal Security Code Setting the base ringer volume Adjusting the speaker volume levelFour times You hear the current ringer option HighSetting the Ring Time Announce only feature Selecting the message record timeUsing your Answering System Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memoRemote access away from home Recording a conversationTo stop recording, press or memo/rec You may select a command from the following chart CommandTurn on the answering system remotely Changing the Digital Security Code Headset Installation Changing the Face PlateTo remove the Face plate To attach the Face plate Installing the Beltclip MaintenanceBattery replacement and handling Power FailureTroubleshooting SymptomSymptom Suggestion Battery Information General InformationAC Adapter Information Precautions Installation Considerations Index G, HRemote access away from home Remote Operation CardTask Key At Uniden, we’ll take care of you