Uniden EXA3955 manual Direct wall mounting

Page 13

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone.

2 Set the retainer clip if necessary.

3 Refer to steps 1 through 4 on page 10 to mount the telephone.

G E T T I N G S TA R T E D [ 11 ]

G E T T I N G S T A R T E D

Image 13

Contents Page Page Contents Welcome FeaturesExplanation purposes N T R O L S a N D F U N C T I O N S Controls and FunctionsFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Battery use time per charge Install the battery packLow battery alert Connect the base unit Base Setting only Choose the dialing modePress and hold flash/set until you hear a confirmation tone Standard wall plate mounting Setting the handset retainer clip for wall mountingDirect wall mounting From the Handset From the Base Making and Receiving CallsHandset On the Base Handset Off the BaseRinger tone and volume Adjusting the Base RingerEarpiece volume RedialFlash and Call Waiting Traveling Out-of-RangeWith the Handset Storing Phone NumbersWith the Base Making Calls with Memory DialingFrom the Memory Location From the One-touch Priority DialPress talk key Erasing Stored NumbersWhen speaking on the base When speaking on the handsetWay Conferencing Intercom from the base to the handset Intercom/Page FeatureIntercom from the handset to base Base. The handset beeps. If no answer, pressTo transfer from the handset to the base Call Transfer FeatureTo transfer from the base to the handset Mute Handset/Base Chain DialingSelecting a Different Channel Tone Dialing Switch-over Integrated Answering Device Using the Menu Mode Setting up your Answering SystemTurning the Answering System On/Off Preset message Setting Your Outgoing Message GreetingRecording a personal outgoing message Greeting Choosing between the two outgoing messagesTo select the minute Setting the TimeSetting a Personal Security Code Adjusting the speaker volume level Setting the base ringer volumeFour times You hear the current ringer option HighSetting the Ring Time Selecting the message record time Announce only featurePlaying your messages Using your Answering SystemSkipping a message Repeating a messageVoice memo Deleting a messageRecording a conversation Remote access away from homeTo stop recording, press or memo/rec Command You may select a command from the following chartTurn on the answering system remotely Changing the Digital Security Code Changing the Face Plate Headset InstallationTo remove the Face plate To attach the Face plate Maintenance Installing the BeltclipPower Failure Battery replacement and handlingSymptom TroubleshootingSymptom Suggestion General Information Battery InformationAC Adapter Information Precautions Installation Considerations G, H IndexRemote Operation Card Remote access away from homeTask Key At Uniden, we’ll take care of you