Uniden EXA3955 manual Setting up the Phone, Do the following steps, Choose the best location

Page 8

Setting up the Phone

Do the following steps:

A. Choose the best location B. Install the battery pack

C. Connect the base unit D. Choose the dialing mode

A. Choose the best location

Before choosing a location for your new phone, read “Installation Conciderations” in “Precautions & Warranty”. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures,

dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

•The location should be close to both a phone jack and a continuous power outlet that is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna to a vertical position.

•The base can be placed on a flat surface such as desk, tabletop, or mounted on a standard wall plate.

[ 6 ] G E T T I N G S TA R T E D

Image 8

Contents Page Page Contents Explanation purposes FeaturesWelcome Controls and Functions N T R O L S a N D F U N C T I O N SFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Low battery alert Install the battery packBattery use time per charge Connect the base unit Press and hold flash/set until you hear a confirmation tone Choose the dialing modeBase Setting only Setting the handset retainer clip for wall mounting Standard wall plate mountingDirect wall mounting Making and Receiving Calls From the Handset From the BaseHandset On the Base Handset Off the BaseAdjusting the Base Ringer Ringer tone and volumeEarpiece volume RedialTraveling Out-of-Range Flash and Call WaitingStoring Phone Numbers With the HandsetMaking Calls with Memory Dialing With the BaseFrom the Memory Location From the One-touch Priority DialErasing Stored Numbers Press talk keyWay Conferencing When speaking on the handsetWhen speaking on the base Intercom/Page Feature Intercom from the base to the handsetIntercom from the handset to base Base. The handset beeps. If no answer, pressTo transfer from the base to the handset Call Transfer FeatureTo transfer from the handset to the base Selecting a Different Channel Chain DialingMute Handset/Base Tone Dialing Switch-over Integrated Answering Device Turning the Answering System On/Off Setting up your Answering SystemUsing the Menu Mode Setting Your Outgoing Message Greeting Preset messageRecording a personal outgoing message Greeting Choosing between the two outgoing messagesSetting the Time To select the minuteSetting a Personal Security Code Setting the base ringer volume Adjusting the speaker volume levelFour times You hear the current ringer option HighSetting the Ring Time Announce only feature Selecting the message record timeUsing your Answering System Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memoTo stop recording, press or memo/rec Remote access away from homeRecording a conversation You may select a command from the following chart CommandTurn on the answering system remotely Changing the Digital Security Code To remove the Face plate To attach the Face plate Headset InstallationChanging the Face Plate Installing the Beltclip MaintenanceBattery replacement and handling Power FailureTroubleshooting SymptomSymptom Suggestion AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations Index G, HRemote access away from home Remote Operation CardTask Key At Uniden, we’ll take care of you