Uniden EXA3955 manual Chain Dialing, Mute Handset/Base, Selecting a Different Channel

Page 23

Chain Dialing

The memory locations on the handset and base are not limited to phone numbers, you may want to store in memory a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.

Mute (Handset/Base)

You can temporarily turn off the microphone so that the person you are talking with cannot hear you. During a telephone call press mute (handset). Press mute/menu (base) to turn off the microphone. Press mute again to cancel the mute feature.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. Interference can come from appliances or other phones in your home (see “Troubleshooting” on page 41).

During the course of a conversation, if you hear static or noise which makes it difficult to hear, press channel . The talk/low batt LED flashes, indicating the phone is changing to another channel.

note

The talk/low batt LED blinks when pressing the mute key on the handset.

TELEPHONE FEATURES

T E L E P H O N E F E AT U R E S [ 21 ]

Image 23

Contents Page Page Contents Explanation purposes FeaturesWelcome N T R O L S a N D F U N C T I O N S Controls and FunctionsFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Low battery alert Install the battery packBattery use time per charge Connect the base unit Press and hold flash/set until you hear a confirmation tone Choose the dialing modeBase Setting only Standard wall plate mounting Setting the handset retainer clip for wall mountingDirect wall mounting Handset Off the Base Making and Receiving CallsFrom the Handset From the Base Handset On the BaseRedial Adjusting the Base RingerRinger tone and volume Earpiece volumeFlash and Call Waiting Traveling Out-of-RangeWith the Handset Storing Phone NumbersFrom the One-touch Priority Dial Making Calls with Memory DialingWith the Base From the Memory LocationPress talk key Erasing Stored NumbersWay Conferencing When speaking on the handsetWhen speaking on the base Base. The handset beeps. If no answer, press Intercom/Page FeatureIntercom from the base to the handset Intercom from the handset to baseTo transfer from the base to the handset Call Transfer FeatureTo transfer from the handset to the base Selecting a Different Channel Chain DialingMute Handset/Base Tone Dialing Switch-over Integrated Answering Device Turning the Answering System On/Off Setting up your Answering SystemUsing the Menu Mode Choosing between the two outgoing messages Setting Your Outgoing Message GreetingPreset message Recording a personal outgoing message GreetingTo select the minute Setting the TimeSetting a Personal Security Code You hear the current ringer option High Setting the base ringer volumeAdjusting the speaker volume level Four timesSetting the Ring Time Selecting the message record time Announce only featurePlaying your messages Using your Answering SystemSkipping a message Repeating a messageVoice memo Deleting a messageTo stop recording, press or memo/rec Remote access away from homeRecording a conversation Command You may select a command from the following chartTurn on the answering system remotely Changing the Digital Security Code To remove the Face plate To attach the Face plate Headset InstallationChanging the Face Plate Maintenance Installing the BeltclipPower Failure Battery replacement and handlingSymptom TroubleshootingSymptom Suggestion AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations G, H IndexRemote Operation Card Remote access away from homeTask Key At Uniden, we’ll take care of you