Uniden EXA3955 manual You may select a command from the following chart, Command

Page 37

4 You may select a command from the following chart:

Command

Function

#then 1 Repeat a Message

#then 2 Playing your Messages

#then 3 Skipping a Message

#then 4 Deleting a Message

#then 5 Stop Message Playback

#then 6 Answering System On

#then 7 Memo Record/Stop *

#then 8 Greeting Message Record/Stop *

#then 9 Answer System Off

#then 0 Help Guidance

*For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again.

5 After the command was finished, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

6 When you are finished, hang up to exit the system. The answering system automatically returns to standby.

note

•You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.

•The system will only playback messages for four minutes and then it returns to command waiting mode. To

continue playing your messages, press # then 2 again within 15 seconds.

THE INTEGRATED ANSWERING DEVICE

T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 35 ]

Image 37

Contents Page Page Contents Welcome FeaturesExplanation purposes N T R O L S a N D F U N C T I O N S Controls and FunctionsFast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Battery use time per charge Install the battery packLow battery alert Connect the base unit Base Setting only Choose the dialing modePress and hold flash/set until you hear a confirmation tone Standard wall plate mounting Setting the handset retainer clip for wall mountingDirect wall mounting From the Handset From the Base Making and Receiving CallsHandset On the Base Handset Off the BaseRinger tone and volume Adjusting the Base RingerEarpiece volume RedialFlash and Call Waiting Traveling Out-of-RangeWith the Handset Storing Phone NumbersWith the Base Making Calls with Memory DialingFrom the Memory Location From the One-touch Priority DialPress talk key Erasing Stored NumbersWhen speaking on the base When speaking on the handsetWay Conferencing Intercom from the base to the handset Intercom/Page FeatureIntercom from the handset to base Base. The handset beeps. If no answer, pressTo transfer from the handset to the base Call Transfer FeatureTo transfer from the base to the handset Mute Handset/Base Chain DialingSelecting a Different Channel Tone Dialing Switch-over Integrated Answering Device Using the Menu Mode Setting up your Answering SystemTurning the Answering System On/Off Preset message Setting Your Outgoing Message GreetingRecording a personal outgoing message Greeting Choosing between the two outgoing messagesTo select the minute Setting the TimeSetting a Personal Security Code Adjusting the speaker volume level Setting the base ringer volumeFour times You hear the current ringer option HighSetting the Ring Time Selecting the message record time Announce only featurePlaying your messages Using your Answering SystemSkipping a message Repeating a messageVoice memo Deleting a messageRecording a conversation Remote access away from homeTo stop recording, press or memo/rec Command You may select a command from the following chartTurn on the answering system remotely Changing the Digital Security Code Changing the Face Plate Headset InstallationTo remove the Face plate To attach the Face plate Maintenance Installing the BeltclipPower Failure Battery replacement and handlingSymptom TroubleshootingSymptom Suggestion General Information Battery InformationAC Adapter Information Precautions Installation Considerations G, H IndexRemote Operation Card Remote access away from homeTask Key At Uniden, we’ll take care of you