English
RECORDING
Recording from the radio
1.Tune to the desired radio station (See TUNING TO RADIO STATIONS).
2.Press STOP•OPEN 9/ to open the cassette door.
3.Insert a suitable cassette into the cassette deck and close the cassette door.
4.Press RECORD 0 to start recording.
•If you are recording from MW/LW stations, adjust the
BEAT CUT switch to eliminate possible whistle tones during
recording.
5.For brief interruptions, press PAUSE ;. To resume recording, press PAUSE ; again.
6.To stop recording, press STOP•OPEN 9/.
MAINTENANCE
1
PLAY•PAUSE
CD
PROGRAM
REPEAT
ALL
CD MOD
MAINTENANCE
Tape deck maintenance
To ensure quality recording and playback of the tape deck, clean parts A,B and C shown in the diagram below, after approx. 50 hours of operation, or on average once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck.
1.Open the cassette door by pressing STOP•OPEN 9/.
2.Press PLAY 1 and clean the rubber pressure rollers C.
3.Press PAUSE ; and clean the magnetic heads A and also the capstan B .
4.After cleaning, press STOP•OPEN 9/.
Note: Cleaning of the heads can also be done by playing a cleaning cassette through once.
C B A A
12