Philips 1007 Cassette Recorder, Playing a Cassette, General information on cassette recording

English

CASSETTE RECORDER

PLAYING A CASSETTE

1.Set the source selector to TAPE.

2.Press STOP•OPEN 9 / to open the cassette holder and insert a recorded cassette.

3.Close the cassette holder.

4.Press PLAY 1 to start playback.

5.Adjust the sound using the VOLUME and DBB controls.

6.To interrupt playback press PAUSE ;. To resume, press the button again.

7.By pressing 5 or 6,fast forwarding of the tape is possible in both directions.To stop fast forwarding, press STOP•OPEN 9

/

8.To stop the tape, press STOP•OPEN 9 /

™The buttons are automatically released at the end of the tape, except if PAUSE ; has been activated.

9.With the source selector in TAPE/POWER OFF position, the set is switched off when all the cassette buttons are released.

General information on cassette recording

•Recording is permissible insofar as copyright or other rights of third parties are not infringed.

•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have not been broken.

•The recording level is set automatically. Altering the VOLUME and DBB controls will not affect the recording in progress.

•At the very beginning and end of the tape, no recording will take place during the 7 seconds, when the leader tape passes the recorder heads.

•To protect a tape from accidental erasure have the tape in front of you and break out the left tab. Recording on this side is no longer possible. To record over this side again, cover the tabs with a piece of adhesive tape.

PAUSE	STOP-OPEN
	SEARCH
	PLAY
	R
	ECORD

SHUFFLE

PAUSE STOP-OPEN

SEARCH

1

12