CASSETTE RECORDER
SYNCHRO START CD RECORDING
1.Set the source selector to CD.
2.Insert a CD and if desired, program track numbers.
3.Press STOP•OPEN 9 / to open the cassette holder.
4.Insert a blank tape.
5.Close the cassette holder.
6.Press RECORD 0 to start recording.
™Playing of the CD program starts automatically from the beginning of the program. It is not necessary to start the CD player separately.
7.For brief interruptions, press PAUSE ;. To resume recording, press PAUSE ; again.
8.To stop recording press STOP•OPEN 9 /
To select and record a particular passage within a track
1.During playback, press and hold down the SEARCH button ∞ or §to find your passage.
2.Press PLAY•PAUSE 2; to put the CD player on pause at the selected passage.
™ Recording will begin from this exact point in the track when you press RECORD 0.
PAUSE | |
| |
| SEARCH |
| PLAY |
| R |
| ECORD |
SHUFFLE
SEARCH | SHUFFLE |
|
CD MODE STOP
PLAY•PAUSE
English
RECORDING FROM THE RADIO
1.Set the source selector to RADIO.
2.Tune to the desired radio station (See RADIO RECEPTION).
3.Press STOP•OPEN 9 / to open the cassette holder and insert a blank tape.
4.Close the cassette holder.
5.Press RECORD 0 to start recording.
Note: If you are recording an AM station, adjust the BEAT CUT switch to eliminate any whistle noises.
6.For brief interruptions, press PAUSE ;. To resume recording, press PAUSE ; again.
7.To stop recording, press STOP•OPEN 9 /
PAUSE | |
| |
| SEARCH |
SHUFFLE
PLAY
RECORD
13