JVC XL-R5000BK manual For U.S.A, If in Doubt Consult a Competent Electrician

Page 2

Warnings, Cautions and Others

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

 

 

CAUTION

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

 

DO NOT REMOVE COVER (OR BACK).

 

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted.

If nontheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT.

DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue : Neutral

Brown : Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

G-1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents XL-R5000BK For U.S.A If in Doubt Consult a Competent ElectricianFor Canada/pour le Canada Class Laser Product Reproduction of Labels Except for Canada & USANo obstructions, place on the level surface Table of Contents Cleaning the cabinet Precautions FeaturesInstallation Disc careAnalog Connections Selecting the Mode switch positionConnections Digital Connections OUT OpticalNames of the Parts Main UnitCD Control operation buttons Remote control sensorCLOCK/TIMER button CD EditDisplay Window Remote Control How to use the remote control correctly Using the Remote ControlInstalling the batteries To turn on the power Power ON/STANDBY OperationsTurning the power on and putting in standby To put the power to standbyListening to CDs Using the Remote Control to Control Playback CDR Playback OperationsPress the number buttons of the track you want to hear Direct Playback from a Specific TrackForward and Reverse Search Repeat Playback During normal play modeSkipping Tracks During program and random play modesRandom Playback To release the random play modeTo adjust the pitch of the source CD during playback CD Playback Pitch ControlInsert CDs that contain tracks to be Programmed Program PlaybackSelect and enter one of the tracks Press the SET buttonProgram playback using the remote control Select and enter the trackRead through this section before recording Recording onto CD-R and CD-RWManual Recording Select one of the recording sourcesPress the 3 play button to start recording Setting automatic or manual track markingPlay the sound of the source to be recorded To record silence in the recordingPerforming synchronized one-button recording of a full CD Synchronized Recording of 3- CD Changer PlaybackTo add track marks manually Select and stop the CD to be recordedListening Edit Recording To stop recording at any timeProgram Edit Recording When the first track has been stored in memoryWhen the last programmed selection is in the memory Press the CDR Control 3 button to start recordingRepeat steps 5 and 6 to continue programming tracks Setting the unit to perform high-speed recordingCD Changer to CDR Recording Options Setting the auto track spacing function Start playing the source component When recording external sourcesSynchronized Start Recording of External Components Start playback of the sources to be recorded Mixed Input RecordingSelect two recording sources to be mixed and recorded Press the CDR Control 3 button to start the recordingErasing a track or tracks Erase function Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Erasing all the tracks Disc Erase function Finalization Load a CD-RW into the CDR deck Press the SET button again to confirm the operationCurrent setting appears in the display Resetting the Unit to Factory Default Settings Cancel 3,4Setting the Clock Setting the Present TimeTimer Operations Timer Play wake-up playWhile Play is flashing, press the SET button 11Turn the power to standbyClearing a timer operation Page Compu Link Function What is Compu LINK?Accessory connecting cables Automatic source selectionCD and CDR Messages Message Significance RemedyTNO Full CD-ROM DiscDisc Full Cannot RECRestriction on Copying Digital Material Scms Serial Copy Management SystemTroubleshooting Main Specifications 110 127
Top Page Image Contents