JVC XL-R5000BK manual Listening Edit Recording, To stop recording at any time

Page 26

2 Insert a recordable CD-R or CD-RW in the CDR disc tray.

3 While the disc is playing back the track you want to record or if that track is being paused, press CD REC on the main unit or CD REC/CD EDIT on the remote control.

Main Unit

 

Remote Control

CD REC

CD REC

 

 

CD EDIT

•The CD restarts playback from the beginning of the track and the CDR starts recording. Recording stops when the track is fin- ished.

•When a CD is recorded, its digital signals are recorded in their original form. A new track mark is automatically placed at the beginning of the track being recorded.

When recording is complete

After “STOP DUBBING” is displayed, operation stops automati- cally.

To stop recording at any time

Press the 7(stop) button.

The recording mode is released after “STOP DUBBING” is dis- played.

Notes

•There is no need to adjust the recording level (for a digital recording).

•If the source CD being recorded from the 3-CD changer is itself a digital copy, digital recording cannot be performed. When this occurs, the recording type will switch automatically from digital to analog.

•Upon completion of recording, “STOP DUBBING” is dis- played.

Always wait for “STOP DUBBING” to be cleared before pro- ceeding with the next operation.

Listening Edit Recording

Selected tracks can be programmed and recorded.

3 12

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

MIN

 

MAX

MIX BALANCE

PHONES LEVEL

MULTI JOG

 

 

STANDBY

 

 

POWER

 

 

 

–

+

1

4

5

1 Select and stop the CD to be recorded.

2 Load a recordable CD-R or CD-RW in the CDR tray.

3 Press the CD EDIT button on the main unit (or press the CD REC/CD EDIT button while holding down the SHIFT button on the remote control) to select the Listening Edit mode.

Main Unit

Remote Control

 

CD REC

CD EDIT

CD EDIT

 

SHIFT

•The unit is put in the record pause mode, and the selected disc starts playback.

•Starts play from the first track, “LISTEN EDIT” appears in the display, and the play time of the first track and remaining recording time on the CD-R or CD-RW are displayed. CDR is set to the record pause mode.

4 Program the tracks while the CD is playing by assigning a tag to each track on the disc.

a. When the track now playing is to be recorded

SET

The track is stored in the memory, and operation moves on to the next track.

b. When the track is not to be recorded

CANCEL

The track is not stored in the memory, and operation moves on to the next track.

21

Page 25 Page 27
Image 26
Page 25 Page 27
Contents XL-R5000BK For U.S.A If in Doubt Consult a Competent ElectricianFor Canada/pour le Canada Class Laser Product Reproduction of Labels Except for Canada & USANo obstructions, place on the level surface Table of Contents Cleaning the cabinet Precautions FeaturesInstallation Disc careAnalog Connections Selecting the Mode switch positionConnections Digital Connections OUT OpticalNames of the Parts Main UnitCD Control operation buttons Remote control sensorCLOCK/TIMER button CD EditDisplay Window Remote Control How to use the remote control correctly Using the Remote ControlInstalling the batteries To turn on the power Power ON/STANDBY OperationsTurning the power on and putting in standby To put the power to standbyListening to CDs Using the Remote Control to Control Playback CDR Playback OperationsPress the number buttons of the track you want to hear Direct Playback from a Specific TrackForward and Reverse Search Repeat Playback During normal play modeSkipping Tracks During program and random play modesRandom Playback To release the random play modeTo adjust the pitch of the source CD during playback CD Playback Pitch ControlInsert CDs that contain tracks to be Programmed Program PlaybackSelect and enter one of the tracks Press the SET buttonProgram playback using the remote control Select and enter the track Read through this section before recording Recording onto CD-R and CD-RW Manual Recording Select one of the recording sourcesPress the 3 play button to start recording Setting automatic or manual track markingPlay the sound of the source to be recorded To record silence in the recordingPerforming synchronized one-button recording of a full CD Synchronized Recording of 3- CD Changer PlaybackTo add track marks manually Select and stop the CD to be recordedListening Edit Recording To stop recording at any timeProgram Edit Recording When the first track has been stored in memoryWhen the last programmed selection is in the memory Press the CDR Control 3 button to start recordingRepeat steps 5 and 6 to continue programming tracks Setting the unit to perform high-speed recordingCD Changer to CDR Recording Options Setting the auto track spacing function Start playing the source component When recording external sourcesSynchronized Start Recording of External Components Start playback of the sources to be recorded Mixed Input RecordingSelect two recording sources to be mixed and recorded Press the CDR Control 3 button to start the recordingErasing a track or tracks Erase function Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Erasing all the tracks Disc Erase function Finalization Load a CD-RW into the CDR deck Press the SET button again to confirm the operationCurrent setting appears in the display Resetting the Unit to Factory Default Settings Cancel 3,4Setting the Clock Setting the Present TimeTimer Operations Timer Play wake-up playWhile Play is flashing, press the SET button 11Turn the power to standbyClearing a timer operation Page Compu Link Function What is Compu LINK?Accessory connecting cables Automatic source selectionCD and CDR Messages Message Significance RemedyTNO Full CD-ROM DiscDisc Full Cannot RECRestriction on Copying Digital Material Scms Serial Copy Management SystemTroubleshooting Main Specifications 110 127
Top Page Image Contents