Mixed Input Recording
3 | 1 |
| 4 |
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER |
| REC LEVEL | |
| MIN |
| MAX |
| MIX BALANCE | PHONES LEVEL | |
| MULTI JOG |
|
|
STANDBY |
|
– | + |
POWER |
|
5 | 62 4 |
1 Load a recordable
disc tray.
2 Press the REC ¦ button on the main unit to put the CDR in the record pause mode.
• The remaining recording time on the disc appears in the display.
3 Select two recording sources to be mixed and recorded.
Example:
CD and LINE are selected
CD | LINE | MIC |
•Press the same button again to clear the selection.
•Select the CD and LINE buttons to mix and record a CD loaded in the
•Select the CD and MIC buttons to mix and record a CD loaded in the
•Select the LINE and MIC buttons to mix and record the line input signals from an external source with the input of a micro- phone connected to the MIC connector.
•The lamps of the selected sources light.
•Since analog signals are recorded, both the REC LEVEL and MIX BALANCE lamps light.
MIX BALANCE | REC LEVEL | |
LINE | CD |
|
MIC | LINE | MAX |
| MIN | |
4 Play the two sources together and adjust the recording level and mixing balance.
REC LEVEL
MINMAX
|
|
|
|
|
| MIX BALANCE |
|
|
|
|
| MIX BALANCE | ||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
| LINE |
| CD |
|
|
|
| LINE |
| CD | ||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
| MIC |
| LINE |
|
|
|
| MIC |
| LINE | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD + LINE | CD volume is reduced. | Line input volume is | ||||||||||||||
|
|
|
|
|
|
|
|
| reduced. |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD + MIC | CD volume is reduced. | Mic input volume is | ||||||||||||||
|
|
|
|
|
|
|
|
| reduced. |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LINE + MIC | Line input volume is | Mic input volume is | ||||||||||||||
| reduced. |
|
| reduced. |
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•Adjust the volume in such a way that the 0 dB display of the level meter is not exceeded when the loudest sound is supplied.
•If the CD input is selected for mixed recording, the pitch con- trols may be used to adjust the speed of CD playback for mixing and recording purposes. (See page 15.)
•If the microphone level is set too high, you may experience a loud howling sound from your speakers. If this occurs, turn down the volume of the microphone by turning down the vol- ume of the amp/receiver powering the speakers you are using to monitor the sound.
•When you have finished adjusting the recording level and the mix balance, set the sources back to the point where you want to start recording at.
5 Start playback of the sources to be recorded.
•If the CD1 button is pressed when mixing with a CD and recording the result, the tracks are recorded in the following sequence: CD1 = CD2 = CD3
6 Press the CDR CONTROL 3 button to start the recording.
When recording is complete
Press the CDR CONTROL 7 (stop) button. The 3 indicator flashes and operation stops.
26