JVC XL-R5000BK manual Setting the Clock, Setting the Present Time

Page 38

Setting the Clock

Setting the Present Time

(To be performed when the unit is to be used for the first time)

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

MIN

 

MAX

MIX BALANCE

PHONES LEVEL

 

 

MULTI JOG

STANDBY

 

 

POWER

–

+

1 CANCEL2,3

2,3

Example: Setting the time to 1:15 PM (while the power is switched to STANDBY).

This unit uses a 12-hour clock to indicate the time.

1 Press the CLOCK/TIMER button.

• The time display is illuminated, and the “hour” indicators starts flashing.

CLOCK/

TIMER

(When the time is to be re-set, the present time will flash.)

2 Turn the MULTI JOG dial to change the hour display to “PM 1”, and then press the SET button.

•The hour display stops flashing, and the minute display starts to flash.

•If you made a mistake in entering the current time, repeat this procedure from the beginning.

•If the CANCEL button is pressed while setting the “minute” display, the flashing “hour” display is restored. This function comes in handy for correcting the “hour” display.

To ascertain the correct time

In most areas, there is a telephone number you can call for the cor- rect time, consult your telephone directory for assiastance.

To change or adjust the time display

It is possible to change the time even after it has been set. Press the CLOCK/TIMER button repeatedly to select the time display, and set the time as described in the procedure on this page. The time can be adjusted even when the unit is in standby.

Function display

CLOCK/

TIMER

DAILY TIMER

ONCE TIMER

Present Time : Select this display and set the time.

Regarding the time display

•The time display for Canada and USA models uses a 12-hour clock.

•Models for other countries use a 24-hour clock.

The illustrations in this Instruction Manual show the Canada and USA model. For users of other models, please note that “AM” and

MULTI JOG

SET

“PM” indications will not be displayed as shown in this manual. Please refer to the illustrations below for differences in the two time display types.

For Canada and USA

For other countries

To put back

To advance

the time

the time

 

Turn the MULTI JOG until

Press the SET button. “PM

“PM 1:00” is displayted.

1:00” is then displayted.

3 Turn the MULTI JOG dial to change the minute display to “15”, and then press the SET button.

SET

MULTI JOG

To put back

To advance

the time

the time

 

Turn the MULTI JOG until

Press the SET button. “PM

“PM 1:15” is displayted.

1:15” is then displayted.

•The current time “1:15” is displayed and the display window darkens.

•The time display cannot be switched between the 12-hour and 24-hour clock display.

33

Page 37 Page 39
Image 38
Page 37 Page 39
Contents XL-R5000BK For U.S.A If in Doubt Consult a Competent ElectricianFor Canada/pour le Canada Class Laser Product Reproduction of Labels Except for Canada & USANo obstructions, place on the level surface Table of Contents Cleaning the cabinet Precautions FeaturesInstallation Disc careAnalog Connections Selecting the Mode switch positionConnections Digital Connections OUT OpticalNames of the Parts Main UnitCD Control operation buttons Remote control sensorCLOCK/TIMER button CD EditDisplay Window Remote Control How to use the remote control correctly Using the Remote ControlInstalling the batteries To turn on the power Power ON/STANDBY OperationsTurning the power on and putting in standby To put the power to standbyListening to CDs Using the Remote Control to Control Playback CDR Playback OperationsPress the number buttons of the track you want to hear Direct Playback from a Specific TrackForward and Reverse Search Repeat Playback During normal play modeSkipping Tracks During program and random play modesRandom Playback To release the random play modeTo adjust the pitch of the source CD during playback CD Playback Pitch ControlInsert CDs that contain tracks to be Programmed Program PlaybackSelect and enter one of the tracks Press the SET buttonProgram playback using the remote control Select and enter the trackRead through this section before recording Recording onto CD-R and CD-RWManual Recording Select one of the recording sourcesPress the 3 play button to start recording Setting automatic or manual track markingPlay the sound of the source to be recorded To record silence in the recordingPerforming synchronized one-button recording of a full CD Synchronized Recording of 3- CD Changer PlaybackTo add track marks manually Select and stop the CD to be recordedListening Edit Recording To stop recording at any timeProgram Edit Recording When the first track has been stored in memoryWhen the last programmed selection is in the memory Press the CDR Control 3 button to start recordingRepeat steps 5 and 6 to continue programming tracks Setting the unit to perform high-speed recordingCD Changer to CDR Recording Options Setting the auto track spacing function Start playing the source component When recording external sourcesSynchronized Start Recording of External Components Start playback of the sources to be recorded Mixed Input RecordingSelect two recording sources to be mixed and recorded Press the CDR Control 3 button to start the recordingErasing a track or tracks Erase function Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Erasing all the tracks Disc Erase function Finalization Load a CD-RW into the CDR deck Press the SET button again to confirm the operationCurrent setting appears in the display Resetting the Unit to Factory Default Settings Cancel 3,4Setting the Clock Setting the Present TimeTimer Operations Timer Play wake-up playWhile Play is flashing, press the SET button 11Turn the power to standbyClearing a timer operation Page Compu Link Function What is Compu LINK?Accessory connecting cables Automatic source selectionCD and CDR Messages Message Significance RemedyTNO Full CD-ROM DiscDisc Full Cannot RECRestriction on Copying Digital Material Scms Serial Copy Management SystemTroubleshooting Main Specifications 110 127
Top Page Image Contents