JVC XL-R5000BK manual Finalization

Page 34

Finalization

Finalization marks the final process in recording on a CD-R or CD- RW in which the TOC (Table Of Contents) is written to the disc. When this procedure is completed, it will be possible to play CD- R/CD-RW on CD players compatible with CD-R/CD-RW.

Please note that once a CD-R has been finalized, no more recording is possible on the disc.

If the power of the unit is turned off or the power plug is pulled from the wall outlet during the finalization process, the record- ing may be lost and the disc may not be usable.

Even after a CD-RW has been finalized, further recording and editing is still possible if the TOC information on the disc is erased using the UNFINALIZE function. (See page 30.)

When an unfinalized CD-R or CD-RW is loaded in the CDR and the EJECT 0 button is pressed to open the CDR disc tray, “FINALIZE?” appears in the display window. When this is the case, skip step 1 on this page.

1,2

 

 

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

MIN

 

MAX

MIX BALANCE

PHONES LEVEL

MULTI JOG

 

 

STANDBY

 

+

POWER

 

CANCEL

 

CD REC

SYNCHRO

DISPLAY POWER

CD EDIT

FINALIZE

MENU

1,2

 

 

 

CD 1

 

 

1

2

3

 

 

 

 

 

 

CD 2

 

 

4

5

6

 

 

 

 

 

 

CD 3

 

 

7

8

9

 

 

 

 

 

CONTROL

 

 

10

+10

CD

CDR

 

 

PLAY MODE REPEAT

SET

CANCEL

CANCEL

 

 

 

 

 

 

 

PITCH +

 

 

1,2

 

PITCH 0

 

 

 

 

 

REC

 

SHIFT

PITCH –

REC MUTING

 

 

 

 

REMOTE CONTROL

RM-SXLR5000J

1 Press FINALIZE button on the front panel (or

press the SYNCHRO/FINALIZE button on the remote control while holding down SHIFT).

“FINALIZE?” appears in the display window.

If you want to cancel the finalization process at this point, press the CANCEL button on the main unit or remote control.

2 Press FINALIZE on the main unit (or press SYNCHRO/FINALIZE on the remote control while holding down SHIFT) again to start the finalization.

The length of time that this process requires is about 2 minutes. During the procedure, the length of the level meter is used to indicate approximately how much time is remaining until final- ization is complete.

The 3-CD changer of this unit is compatible with finalized CD- RW, however, not all CD players can play back CD-RW even after they have been finalized.

During the finalization process, it will not be possible to remove or load discs in the 3-CD changer, nor is playback of CDs loaded in the 3-CD changer possible.

29

Image 34
Contents XL-R5000BK For U.S.A If in Doubt Consult a Competent ElectricianFor Canada/pour le Canada Class Laser Product Reproduction of Labels Except for Canada & USANo obstructions, place on the level surface Table of Contents Cleaning the cabinet Precautions FeaturesInstallation Disc careConnections Selecting the Mode switch positionAnalog Connections Digital Connections OUT OpticalNames of the Parts Main UnitCD Control operation buttons Remote control sensorCLOCK/TIMER button CD EditDisplay Window Remote Control Installing the batteries Using the Remote ControlHow to use the remote control correctly To turn on the power Power ON/STANDBY OperationsTurning the power on and putting in standby To put the power to standbyListening to CDs Using the Remote Control to Control Playback CDR Playback OperationsForward and Reverse Search Direct Playback from a Specific TrackPress the number buttons of the track you want to hear Repeat Playback During normal play modeSkipping Tracks During program and random play modesRandom Playback To release the random play modeTo adjust the pitch of the source CD during playback CD Playback Pitch ControlInsert CDs that contain tracks to be Programmed Program PlaybackSelect and enter one of the tracks Press the SET buttonProgram playback using the remote control Select and enter the trackRead through this section before recording Recording onto CD-R and CD-RWManual Recording Select one of the recording sourcesPress the 3 play button to start recording Setting automatic or manual track markingPlay the sound of the source to be recorded To record silence in the recordingPerforming synchronized one-button recording of a full CD Synchronized Recording of 3- CD Changer PlaybackTo add track marks manually Select and stop the CD to be recordedListening Edit Recording To stop recording at any timeProgram Edit Recording When the first track has been stored in memoryWhen the last programmed selection is in the memory Press the CDR Control 3 button to start recordingCD Changer to CDR Recording Options Setting the unit to perform high-speed recordingRepeat steps 5 and 6 to continue programming tracks Setting the auto track spacing function Synchronized Start Recording of External Components When recording external sourcesStart playing the source component Start playback of the sources to be recorded Mixed Input RecordingSelect two recording sources to be mixed and recorded Press the CDR Control 3 button to start the recordingSkipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a track or tracks Erase function Erasing all the tracks Disc Erase function Finalization Load a CD-RW into the CDR deck Press the SET button again to confirm the operationCurrent setting appears in the display Resetting the Unit to Factory Default Settings Cancel 3,4Setting the Clock Setting the Present TimeTimer Operations Timer Play wake-up playClearing a timer operation 11Turn the power to standbyWhile Play is flashing, press the SET button Page Compu Link Function What is Compu LINK?Accessory connecting cables Automatic source selectionCD and CDR Messages Message Significance RemedyTNO Full CD-ROM DiscDisc Full Cannot RECRestriction on Copying Digital Material Scms Serial Copy Management SystemTroubleshooting Main Specifications 110 127