JVC XL-R5000BK manual Timer Operations, Timer Play wake-up play

Page 39

Timer Operations

Timer Play (wake-up play)

Before proceeding with timer programming, make sure that the present time has been set correctly. (See page 33.)

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

MIN

 

MAX

MIX BALANCE

PHONES LEVEL

MULTI JOG

 

 

STANDBY

 

 

 

POWER

 

–

+

 

 

 

1,11 2

3~8,10

4~7,9

Example: Setting the unit to turn on and play a CD from 7:15 AM to 8:15 AM.

1 Turn on the power.

•The selected function (“CD” at the time of purchase) is dis- played.

2 Press CLOCK/TIMER repeatedly to select the timer mode (DAILY TIMER or ONCE TIMER).

•The mode changes each time this button is pressed.

Function display

DAILY TIMER : The timer is activated every day.

ONCE TIMER : The timer is activated only once.

Present Time (“hour” display flashes.)

3 Press the SET button.

SET

The start time flashes.

4 Turn the MULTI JOG dial to set the hour display to “AM 7”, and press SET.

•The hour display stops flashing and the minute display starts to flash.

MULTI JOG

 

SET

To put back

To advance

the time

the time

 

1. Turn the MULTI JOG until

2. Press the SET button. “AM

“AM 7:00” is displayed.

 

7:00” is then displayed.

5 Turn the MULTI JOG dial to change the minute display to “15”, and then press the SET button.

• The hour display of the timer stop time starts to flash.

MULTI JOG

SET

 

To put back

To advance

the time

the time

3. Turn the MULTI JOG until

4. Press the SET button. “OFF

“AM 7:15” is displayed.

 

AM 12:00” is then displayed.

The end time flashes.

6 Turn the MULTI JOG dial to set the hour display to “8”, and press SET.

•The hour display stops flashing and the minute display starts to flash.

SET

MULTI JOG

To put back

To advance

 

the time

the time

 

1. Turn the MULTI JOG until

2. Press the SET button. “AM

“AM 8:00” is displayed.

8:00” is then displayed.

7 Turn the MULTI JOG dial to change the minute display to “15”, and then press the SET button.

• “PLAY” is displayed.

SET

MULTI JOG

To put back

To advance

the time

the time

 

3. Turn the MULTI JOG until

4. Press the SET button.

“AM 8:15” is displayed.

“PLAY” is then displayed.

When “Play” is displayed, it is necessary to set the Timer Play or Timer Recording function.

For Timer Play and Timer Recording, see the procedure on the fol- lowing page.

Note

•If the CANCEL button is pressed while setting the “minute” display, the flashing “hour” display is restored. This function comes in handy for correcting the “hour” display.

34

Page 38 Page 40
Image 39
Page 38 Page 40
Contents XL-R5000BK If in Doubt Consult a Competent Electrician For U.S.AFor Canada/pour le Canada Reproduction of Labels Except for Canada & USA Class Laser ProductNo obstructions, place on the level surface Table of Contents Disc care Precautions FeaturesInstallation Cleaning the cabinetSelecting the Mode switch position ConnectionsAnalog Connections OUT Optical Digital ConnectionsMain Unit Names of the PartsCD Edit Remote control sensorCLOCK/TIMER button CD Control operation buttonsDisplay Window Remote Control Using the Remote Control Installing the batteriesHow to use the remote control correctly To put the power to standby Power ON/STANDBY OperationsTurning the power on and putting in standby To turn on the powerListening to CDs CDR Playback Operations Using the Remote Control to Control PlaybackDirect Playback from a Specific Track Forward and Reverse SearchPress the number buttons of the track you want to hear During program and random play modes During normal play modeSkipping Tracks Repeat PlaybackCD Playback Pitch Control To release the random play modeTo adjust the pitch of the source CD during playback Random PlaybackPress the SET button Program PlaybackSelect and enter one of the tracks Insert CDs that contain tracks to be ProgrammedSelect and enter the track Program playback using the remote controlSelect one of the recording sources Recording onto CD-R and CD-RWManual Recording Read through this section before recordingTo record silence in the recording Setting automatic or manual track markingPlay the sound of the source to be recorded Press the 3 play button to start recordingSelect and stop the CD to be recorded Synchronized Recording of 3- CD Changer PlaybackTo add track marks manually Performing synchronized one-button recording of a full CDTo stop recording at any time Listening Edit RecordingPress the CDR Control 3 button to start recording When the first track has been stored in memoryWhen the last programmed selection is in the memory Program Edit RecordingSetting the unit to perform high-speed recording CD Changer to CDR Recording OptionsRepeat steps 5 and 6 to continue programming tracks Setting the auto track spacing function When recording external sources Synchronized Start Recording of External ComponentsStart playing the source component Press the CDR Control 3 button to start the recording Mixed Input RecordingSelect two recording sources to be mixed and recorded Start playback of the sources to be recordedSpecial Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a track or tracks Erase function Erasing all the tracks Disc Erase function Finalization Press the SET button again to confirm the operation Load a CD-RW into the CDR deckCurrent setting appears in the display Cancel 3,4 Resetting the Unit to Factory Default SettingsSetting the Present Time Setting the ClockTimer Play wake-up play Timer Operations11Turn the power to standby Clearing a timer operationWhile Play is flashing, press the SET button Page Automatic source selection What is Compu LINK?Accessory connecting cables Compu Link FunctionMessage Significance Remedy CD and CDR MessagesCannot REC CD-ROM DiscDisc Full TNO FullScms Serial Copy Management System Restriction on Copying Digital MaterialTroubleshooting Main Specifications 110 127
Top Page Image Contents