JVC XL-R5000BK manual Digital Connections, OUT Optical

Page 9

Digital Connections

Before proceeding, check whether the optical digital cable can be connected.

•Connect a receiver or amplifier with digital audio capability to the DIGITAL OPTICAL connectors on this unit.

•One connecting cable is used to transmit the stereo signals (L/

R)as a digital signal.

•If analog audio connections are also being made, try to use the digital connectors on the receiver or amplifier that are labeled the same way as the analog connectors.

•Before purchasing an optical digital cable (optional), make sure that the cable in question can be connected to the amplifier, etc.

•Do not bend the optical digital cable at a sharp angle.

•When the power is turned on, the inside of the connector lights up red. This light is for sending the digital signals. Although this light will not harm your eyes, keep the protective cap in place if the connector is not going to be used.

Input signal

DIGITAL IN
OPTICAL
DIGITAL OUT
OPTICAL
LINE
IN ( REC) OUT (PLAY )
LEFT	LEFT
RIGHT	RIGHT
To DIGITAL
OUT OPTICAL
connector

Output signal

CD player, etc.

To OPTICAL OUTPUT connector

Optional optical digital cable

XL-R5000 CD/CDR MULTIPLE

COMPACT DISC RECORDER

VOLTAGE SELECTOR

COMPU		LINK-4
	(SYNCHRO)
MODE
CDR	TD

Units have a voltage selector excluding units for

Canada, Europe, and U.S.A.

How to use the OPTICAL connectors for the connections

1 Remove the protective cap.

Optional

	optical digital	• When the connector is not going to be used, fit this protective
	optical digital	cap back in position.
	cable	cap back in position.

To OPTICAL INPUT connector

Receiver or amplifier with digital OPTICAL connector

2 Check that the end of the optical digital cable is not dirty, and insert it securely.

4

Image 9

Contents XL-R5000BK If in Doubt Consult a Competent Electrician For U.S.AFor Canada/pour le Canada Reproduction of Labels Except for Canada & USA Class Laser ProductNo obstructions, place on the level surface Table of Contents Installation Precautions FeaturesCleaning the cabinet Disc careSelecting the Mode switch position ConnectionsAnalog Connections OUT Optical Digital ConnectionsMain Unit Names of the PartsCLOCK/TIMER button Remote control sensorCD Control operation buttons CD EditDisplay Window Remote Control Using the Remote Control Installing the batteriesHow to use the remote control correctly Turning the power on and putting in standby Power ON/STANDBY OperationsTo turn on the power To put the power to standbyListening to CDs CDR Playback Operations Using the Remote Control to Control PlaybackDirect Playback from a Specific Track Forward and Reverse SearchPress the number buttons of the track you want to hear Skipping Tracks During normal play modeRepeat Playback During program and random play modesTo adjust the pitch of the source CD during playback To release the random play modeRandom Playback CD Playback Pitch ControlSelect and enter one of the tracks Program PlaybackInsert CDs that contain tracks to be Programmed Press the SET buttonSelect and enter the track Program playback using the remote controlManual Recording Recording onto CD-R and CD-RWRead through this section before recording Select one of the recording sourcesPlay the sound of the source to be recorded Setting automatic or manual track markingPress the 3 play button to start recording To record silence in the recordingTo add track marks manually Synchronized Recording of 3- CD Changer PlaybackPerforming synchronized one-button recording of a full CD Select and stop the CD to be recordedTo stop recording at any time Listening Edit RecordingWhen the last programmed selection is in the memory When the first track has been stored in memoryProgram Edit Recording Press the CDR Control 3 button to start recordingSetting the unit to perform high-speed recording CD Changer to CDR Recording OptionsRepeat steps 5 and 6 to continue programming tracks Setting the auto track spacing function When recording external sources Synchronized Start Recording of External ComponentsStart playing the source component Select two recording sources to be mixed and recorded Mixed Input RecordingStart playback of the sources to be recorded Press the CDR Control 3 button to start the recordingSpecial Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a track or tracks Erase function Erasing all the tracks Disc Erase function Finalization Press the SET button again to confirm the operation Load a CD-RW into the CDR deckCurrent setting appears in the display Cancel 3,4 Resetting the Unit to Factory Default SettingsSetting the Present Time Setting the ClockTimer Play wake-up play Timer Operations11Turn the power to standby Clearing a timer operationWhile Play is flashing, press the SET button Page Accessory connecting cables What is Compu LINK?Compu Link Function Automatic source selectionMessage Significance Remedy CD and CDR MessagesDisc Full CD-ROM DiscTNO Full Cannot RECScms Serial Copy Management System Restriction on Copying Digital MaterialTroubleshooting Main Specifications 110 127