JVC XL-R5000BK manual Load a CD-RW into the CDR deck

Page 35

Making recording possible again on a finalized CD-RW (UNFINALIZE function)

Once a CD-R has been finalized, further recording on that disc can- not be performed. However, by erasing the TOC (Table of Con- tents) on a CD-RW, the disc can be recorded on again.

1

 

 

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

MIN

 

MAX

MIX BALANCE

PHONES LEVEL

 

MULTI JOG

STANDBY

 

–

+

POWER

 

CANCEL 4,5 2

3

1 Load a CD-RW into the CDR deck.

•The CD-RW and FINALIZED indicators light for a CD-RW that has been finalized.

2 When the unit is in the stop mode, press the MENU button on the main unit (or the DISPLAY/ MENU button on the remote control while holding down the SHIFT button)

3 Turn the MULTI JOG dial or press the 4/¢ button on the remote control until “UNFINALIZE” appears in the display.

4 Press the SET button.

•“UNFINALIZE?” appears in the display.

•Press the CANCEL button to cancel the procedure and return to the normal display.

5 Press the SET button again to confirm the operation.

•“UNFINALIZE” appears in the display and the unfinalization procedure is performed. The procedure takes about one and a quarter minutes to perform. During the procedure the length of the level meter is used to indicate approximately how much time is remaining unitl unfinalization is complete. Upon com- pletion, the normal display is returned to.

Bypassing the FS Converter (Sampling Frequency Converter*) for More Efficient Digital Recording

* known as Sampling Rate Converter.

The FS converter of this unit allows it to convert the digital signals of sources with sampling frequencies other than 44.1 kHz to the sampling frequency of 44.1 kHz necessary for it to be recorded to a CD-R or CD-RW.

When the FS converter is set to “OFF”, the FS converter is bypassed when the digital signal of the source has a sampling fre- quency of 44.1 kHz (even if the FS converter is set to “OFF”, the FS converter cannot be bypassed for digital signals with sampling frequencies other than 44.1 kHz) and it automatically turns ON if high-speed recording (DUB-SPEED 2X) from 3CD is started.To record by bypassing the FS converter, use “DUB-SPEED 1X” recording. With this setting, the pure digital signal is preserved. When recording specially encoded discs such as dts*1 CD, HDCD CD*2, etc., be sure to use the following set this CONVERTER to “OFF” (see step 4) and DUB-SPEED to “1X” (see step 5 on page 23).

When the FS converter is set to “ON”, the FS converter functions even when the sampling frequency of the digital signal is 44.1 kHz. The obvious merit of this setting is that it reduces jitter in disc recording. For this reason, setting this function to “ON” is recom- mended for most recording purposes.

*1dts is trademark of Digital Theater Systems, Inc.

*2HDCD® is registered trademark of Pacific Microsonic, Inc.

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

MIN

 

MAX

MIX BALANCE

PHONES LEVEL

 

 

 

MULTI JOG

STANDBY

 

 

 

POWER

 

–

+

CANCEL 3,5

1

2,4

CD REC

SYNCHRO

DISPLAY POWER

CD EDIT

FINALIZE

MENU

 

 

 

 

CD 1

1

 

1

2

3

 

 

 

 

 

 

CD 2

 

 

4

5

6

 

 

 

 

 

 

CD 3

 

 

7

8

9

 

 

 

 

 

CONTROL

 

 

10 +10

CD

CDR

CANCEL

3,5

PLAY MODE REPEAT

SET

CANCEL

 

PITCH +

 

 

1

 

PITCH 0

REC

2,4

SHIFT

PITCH –

REC MUTING

 

 

 

 

 

REMOTE CONTROL

RM-SXLR5000J

1 When the unit is in stop mode, press the MENU

button (or the DISPLAY/MENU button on the remote control while holding down the SHIFT button).

30

Page 34 Page 36
Image 35
Page 34 Page 36
Contents XL-R5000BK If in Doubt Consult a Competent Electrician For U.S.AFor Canada/pour le Canada Reproduction of Labels Except for Canada & USA Class Laser ProductNo obstructions, place on the level surface Table of Contents Disc care Precautions FeaturesInstallation Cleaning the cabinetAnalog Connections Selecting the Mode switch positionConnections OUT Optical Digital ConnectionsMain Unit Names of the PartsCD Edit Remote control sensorCLOCK/TIMER button CD Control operation buttonsDisplay Window Remote Control How to use the remote control correctly Using the Remote ControlInstalling the batteries To put the power to standby Power ON/STANDBY OperationsTurning the power on and putting in standby To turn on the powerListening to CDs CDR Playback Operations Using the Remote Control to Control PlaybackPress the number buttons of the track you want to hear Direct Playback from a Specific TrackForward and Reverse Search During program and random play modes During normal play modeSkipping Tracks Repeat PlaybackCD Playback Pitch Control To release the random play modeTo adjust the pitch of the source CD during playback Random PlaybackPress the SET button Program PlaybackSelect and enter one of the tracks Insert CDs that contain tracks to be ProgrammedSelect and enter the track Program playback using the remote controlSelect one of the recording sources Recording onto CD-R and CD-RWManual Recording Read through this section before recordingTo record silence in the recording Setting automatic or manual track markingPlay the sound of the source to be recorded Press the 3 play button to start recordingSelect and stop the CD to be recorded Synchronized Recording of 3- CD Changer PlaybackTo add track marks manually Performing synchronized one-button recording of a full CDTo stop recording at any time Listening Edit RecordingPress the CDR Control 3 button to start recording When the first track has been stored in memoryWhen the last programmed selection is in the memory Program Edit RecordingRepeat steps 5 and 6 to continue programming tracks Setting the unit to perform high-speed recordingCD Changer to CDR Recording Options Setting the auto track spacing function Start playing the source component When recording external sourcesSynchronized Start Recording of External Components Press the CDR Control 3 button to start the recording Mixed Input RecordingSelect two recording sources to be mixed and recorded Start playback of the sources to be recorded Erasing a track or tracks Erase function Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track Skip Erasing all the tracks Disc Erase function Finalization Press the SET button again to confirm the operation Load a CD-RW into the CDR deckCurrent setting appears in the display Cancel 3,4 Resetting the Unit to Factory Default SettingsSetting the Present Time Setting the ClockTimer Play wake-up play Timer OperationsWhile Play is flashing, press the SET button 11Turn the power to standbyClearing a timer operation Page Automatic source selection What is Compu LINK?Accessory connecting cables Compu Link FunctionMessage Significance Remedy CD and CDR MessagesCannot REC CD-ROM DiscDisc Full TNO FullScms Serial Copy Management System Restriction on Copying Digital MaterialTroubleshooting Main Specifications 110 127
Top Page Image Contents