JVC XL-R5000BK manual Current setting appears in the display

Page 36

2 Turn the MULTI JOG on the main unit or press the 4 and ¢ buttons on the remote control until “CONVERTER” appears in the display.

3 Press the SET button.

•The current setting appears in the display. (The setting is ON by default.)

•Press the CANCEL button if you do not wish to perform this procedure.

4 Turn the MULTI JOG on the main unit or press the 4 and ¢ buttons on the remote control to select “ON” or “OFF”.

•When the FS converter setting is set to “ON”, the FS converter is used for all recording regardless of the frequency of the source.

•When the FS converter is set to “OFF”, the FS converter is bypassed during input of digital sampling frequencies of 44.1 kHz and during analog and multiple input recording. However, when source sampling frequencies of 32 kHz or 48 kHz are encountered, the FS converter is used regardless of the setting.

•Press the CANCEL button if you do not want to perform this procedure. The setting is not changed.

5 Press the SET button.

Setting Up Synchronized Start Recording for External Digital Sources (CD, MD, and DAT only)

When performing digital synchronized start recording of an exter- nally connected digital source, synchronized start recording begins when a digital signal is encountered in the record pause mode. However, it is also possible to set this unit to start and stop record- ing when you are recording a single track.

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

MIN

 

MAX

MIX BALANCE

PHONES LEVEL

 

 

 

MULTI JOG

STANDBY

 

 

 

POWER

 

–

+

 

 

 

CANCEL 3,5

1

2,4

CD REC

SYNCHRO

DISPLAY POWER

CD EDIT

FINALIZE

MENU

 

 

 

 

CD 1

1

 

1

2

3

 

 

 

 

 

 

CD 2

 

 

4

5

6

 

 

 

 

 

 

CD 3

 

 

7

8

9

 

 

 

 

 

CONTROL

 

 

10

+10

CD

CDR

 

3,5

PLAY MODE REPEAT

SET

CANCEL

CANCEL

 

 

 

 

 

PITCH +

 

 

1

 

PITCH 0

REC

2,4

SHIFT

PITCH –

REC MUTING

 

 

 

 

 

REMOTE CONTROL

RM-SXLR5000J

1 When the unit is in stop mode, press the MENU

button (or the DISPLAY/MENU button on the remote control while holding down the SHIFT button).

2 Turn the MULTI JOG on the main unit or press the 4 and ¢ buttons on the remote control until “D-IN SYNCHRO” appears in the display.

3 Press the SET button.

• The current setting appears in the display.

4 Turn the MULTI JOG on the main unit or press the 4 and ¢ buttons on the remote control to select “START” or “START&STOP”.

•When “START” is selected, only the start of the digital signal is recorded synchronously.

•When “START&STOP” is selected, both the start and stop of single track recroding are controlled by information in the source digital signal.

•Press the CANCEL button if you do not want to perform this procedure. The setting is not changed.

5 Press the SET button.

•Please note that the type of synchronized recording being per- formed as set in the above procedure is not indicated in the dis- play during actual recording. Even when recording is started, only the “SYNCHRO” indicator remains lit until recording is stopped.

•Even if this setting is set to “START&STOP”, recording is con- cluded automatically if the source is stopped, the disc is changed, or if a track search is performed.

31

Page 35 Page 37
Image 36
Page 35 Page 37
Contents XL-R5000BK For U.S.A If in Doubt Consult a Competent ElectricianFor Canada/pour le Canada Class Laser Product Reproduction of Labels Except for Canada & USANo obstructions, place on the level surface Table of Contents Precautions Features InstallationCleaning the cabinet Disc careSelecting the Mode switch position ConnectionsAnalog Connections Digital Connections OUT OpticalNames of the Parts Main UnitRemote control sensor CLOCK/TIMER buttonCD Control operation buttons CD EditDisplay Window Remote Control Using the Remote Control Installing the batteriesHow to use the remote control correctly Power ON/STANDBY Operations Turning the power on and putting in standbyTo turn on the power To put the power to standbyListening to CDs Using the Remote Control to Control Playback CDR Playback OperationsDirect Playback from a Specific Track Forward and Reverse SearchPress the number buttons of the track you want to hear During normal play mode Skipping TracksRepeat Playback During program and random play modesTo release the random play mode To adjust the pitch of the source CD during playbackRandom Playback CD Playback Pitch ControlProgram Playback Select and enter one of the tracksInsert CDs that contain tracks to be Programmed Press the SET buttonProgram playback using the remote control Select and enter the trackRecording onto CD-R and CD-RW Manual RecordingRead through this section before recording Select one of the recording sourcesSetting automatic or manual track marking Play the sound of the source to be recordedPress the 3 play button to start recording To record silence in the recordingSynchronized Recording of 3- CD Changer Playback To add track marks manuallyPerforming synchronized one-button recording of a full CD Select and stop the CD to be recordedListening Edit Recording To stop recording at any timeWhen the first track has been stored in memory When the last programmed selection is in the memoryProgram Edit Recording Press the CDR Control 3 button to start recordingSetting the unit to perform high-speed recording CD Changer to CDR Recording OptionsRepeat steps 5 and 6 to continue programming tracks Setting the auto track spacing function When recording external sources Synchronized Start Recording of External ComponentsStart playing the source component Mixed Input Recording Select two recording sources to be mixed and recordedStart playback of the sources to be recorded Press the CDR Control 3 button to start the recordingSpecial Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a track or tracks Erase function Erasing all the tracks Disc Erase function Finalization Load a CD-RW into the CDR deck Press the SET button again to confirm the operationCurrent setting appears in the display Resetting the Unit to Factory Default Settings Cancel 3,4Setting the Clock Setting the Present TimeTimer Operations Timer Play wake-up play11Turn the power to standby Clearing a timer operationWhile Play is flashing, press the SET button Page What is Compu LINK? Accessory connecting cablesCompu Link Function Automatic source selectionCD and CDR Messages Message Significance RemedyCD-ROM Disc Disc FullTNO Full Cannot RECRestriction on Copying Digital Material Scms Serial Copy Management SystemTroubleshooting Main Specifications 110 127
Top Page Image Contents