JVC XL-R5000BK manual While Play is flashing, press the SET button, 11Turn the power to standby

Page 40

8 While “PLAY” is flashing, press the SET button

SET

9 Turn the MULTI JOG dial to set the function to CD or CDR.

10Press the SET button.

•This display appears when the DAILY TIMER play mode is set.

SET

DAILY

The timer programming is

displayed once, and then the function display is restored.

•When “REC” flashes, turn the MULTI JOG dial until “PLAY” flashes.

11Turn the power to standby.

The present time now appears in the display window.

Notes

•Timer functions cannot be performed if the unit is on when the set time arrives. Make sure that the unit is put in standby for timer functions to operate.

•Match the connected receiver or other source with the unit’s set- ting, and adjust the volume to the appropriate level. Match the timer with the unit’s timer setting.

•Timer play starts at the programmed start time, and the power is switched to STANDBY at the programmed end time.

Clearing a timer operation

Press the CLOCK/TIMER button, select the timer mode, and press the CANCEL button. “DAILY OFF” or “ONCE OFF” appear in the display, the DAILY 3 (or ONCE 3) indicator is cleared, and the timer operation is also canceled.

Timer Recording (unattended recording of the sound from a broadcast receiver or other component)

4
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER	REC LEVEL
MIN		MAX
MIX BALANCE		PHONES LEVEL
MULTI JOG

STANDBY
POWER		–	+
POWER
5	2,3	2,3

1 Perform steps 1 to 7 of the procedure described

in “Timer Play (wake-up play)” on page 34.

2 While “PLAY” is flashing, turn the MULTI JOG dial to select “REC?” and press the SET button.

MULTI JOG	SET

3 Turn the MULTI JOG dial to select the sound source to be recorded, and press the SET button.

SOURCE DIG: Optical digital input

SOURCE LINE: Line input (analog)

SOURCE MIC: Mic input (analog)

MULTI JOG			SET

4 Load a recordable CD-R or CD-RW in the CDR. 5 Turn the power to standby.

The present time now appears in the display window.

35

Image 40

Contents XL-R5000BK For U.S.A If in Doubt Consult a Competent ElectricianFor Canada/pour le Canada Class Laser Product Reproduction of Labels Except for Canada & USANo obstructions, place on the level surface Table of Contents Precautions Features InstallationCleaning the cabinet Disc careConnections Selecting the Mode switch positionAnalog Connections Digital Connections OUT OpticalNames of the Parts Main UnitRemote control sensor CLOCK/TIMER buttonCD Control operation buttons CD EditDisplay Window Remote Control Installing the batteries Using the Remote ControlHow to use the remote control correctly Power ON/STANDBY Operations Turning the power on and putting in standbyTo turn on the power To put the power to standbyListening to CDs Using the Remote Control to Control Playback CDR Playback OperationsForward and Reverse Search Direct Playback from a Specific TrackPress the number buttons of the track you want to hear During normal play mode Skipping TracksRepeat Playback During program and random play modesTo release the random play mode To adjust the pitch of the source CD during playbackRandom Playback CD Playback Pitch ControlProgram Playback Select and enter one of the tracksInsert CDs that contain tracks to be Programmed Press the SET buttonProgram playback using the remote control Select and enter the trackRecording onto CD-R and CD-RW Manual RecordingRead through this section before recording Select one of the recording sourcesSetting automatic or manual track marking Play the sound of the source to be recordedPress the 3 play button to start recording To record silence in the recordingSynchronized Recording of 3- CD Changer Playback To add track marks manuallyPerforming synchronized one-button recording of a full CD Select and stop the CD to be recordedListening Edit Recording To stop recording at any timeWhen the first track has been stored in memory When the last programmed selection is in the memoryProgram Edit Recording Press the CDR Control 3 button to start recordingCD Changer to CDR Recording Options Setting the unit to perform high-speed recordingRepeat steps 5 and 6 to continue programming tracks Setting the auto track spacing function Synchronized Start Recording of External Components When recording external sourcesStart playing the source component Mixed Input Recording Select two recording sources to be mixed and recordedStart playback of the sources to be recorded Press the CDR Control 3 button to start the recordingSkipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a track or tracks Erase function Erasing all the tracks Disc Erase function Finalization Load a CD-RW into the CDR deck Press the SET button again to confirm the operationCurrent setting appears in the display Resetting the Unit to Factory Default Settings Cancel 3,4Setting the Clock Setting the Present TimeTimer Operations Timer Play wake-up playClearing a timer operation 11Turn the power to standbyWhile Play is flashing, press the SET button Page What is Compu LINK? Accessory connecting cablesCompu Link Function Automatic source selectionCD and CDR Messages Message Significance RemedyCD-ROM Disc Disc FullTNO Full Cannot RECRestriction on Copying Digital Material Scms Serial Copy Management SystemTroubleshooting Main Specifications 110 127