JVC XL-R5000BK manual No obstructions, place on the level surface

Page 5

Caution: Proper Ventilation

To avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:	No obstructions open spacing.
Sides:	No obstructions in 3 cm from the sides.
Top:	No obstructions in 5 cm from the top.
Back:	No obstructions in 15 cm from the back
Bottom:	No obstructions, place on the level surface.

Wall or obstructions

Spacing 15 cm or more

Front

XL-R5000BK

Stand height 15 cm or more

Floor

G-4

Image 5

Contents XL-R5000BK If in Doubt Consult a Competent Electrician For U.S.AFor Canada/pour le Canada Reproduction of Labels Except for Canada & USA Class Laser ProductNo obstructions, place on the level surface Table of Contents Installation Precautions FeaturesCleaning the cabinet Disc careAnalog Connections Selecting the Mode switch positionConnections OUT Optical Digital ConnectionsMain Unit Names of the PartsCLOCK/TIMER button Remote control sensorCD Control operation buttons CD EditDisplay Window Remote Control How to use the remote control correctly Using the Remote ControlInstalling the batteries Turning the power on and putting in standby Power ON/STANDBY OperationsTo turn on the power To put the power to standbyListening to CDs CDR Playback Operations Using the Remote Control to Control PlaybackPress the number buttons of the track you want to hear Direct Playback from a Specific TrackForward and Reverse Search Skipping Tracks During normal play modeRepeat Playback During program and random play modesTo adjust the pitch of the source CD during playback To release the random play modeRandom Playback CD Playback Pitch ControlSelect and enter one of the tracks Program PlaybackInsert CDs that contain tracks to be Programmed Press the SET buttonSelect and enter the track Program playback using the remote controlManual Recording Recording onto CD-R and CD-RWRead through this section before recording Select one of the recording sourcesPlay the sound of the source to be recorded Setting automatic or manual track markingPress the 3 play button to start recording To record silence in the recordingTo add track marks manually Synchronized Recording of 3- CD Changer PlaybackPerforming synchronized one-button recording of a full CD Select and stop the CD to be recordedTo stop recording at any time Listening Edit RecordingWhen the last programmed selection is in the memory When the first track has been stored in memoryProgram Edit Recording Press the CDR Control 3 button to start recordingRepeat steps 5 and 6 to continue programming tracks Setting the unit to perform high-speed recordingCD Changer to CDR Recording Options Setting the auto track spacing function Start playing the source component When recording external sourcesSynchronized Start Recording of External Components Select two recording sources to be mixed and recorded Mixed Input RecordingStart playback of the sources to be recorded Press the CDR Control 3 button to start the recordingErasing a track or tracks Erase function Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Erasing all the tracks Disc Erase function Finalization Press the SET button again to confirm the operation Load a CD-RW into the CDR deckCurrent setting appears in the display Cancel 3,4 Resetting the Unit to Factory Default SettingsSetting the Present Time Setting the ClockTimer Play wake-up play Timer OperationsWhile Play is flashing, press the SET button 11Turn the power to standbyClearing a timer operation Page Accessory connecting cables What is Compu LINK?Compu Link Function Automatic source selectionMessage Significance Remedy CD and CDR MessagesDisc Full CD-ROM DiscTNO Full Cannot RECScms Serial Copy Management System Restriction on Copying Digital MaterialTroubleshooting Main Specifications 110 127