SYSTEM Model Radios
1.With scan operation turned off, select the desired group to add to the selected trunked system group scan list.
2.Press 6. The current priority status of the
group will be displayed in column 10 of line three for a
3.While the status is displayed, press 6to add
the group to the scan list. 
is displayed on line three.
4.Press 6 a second time to set the group to Priority 2. A 
is displayed on line three.
5.Press 6 a third time to set the group to
Priority 1. A 
is displayed on line three. The priority level selection sequence only advances the group to next higher priority level and stops at priority level 1. To select a lower priority level, the group must be deleted from the scan list and then added back to the scan list. Each new group added to the scan list starts at the lowest priority. If the Priority 1 and Priority 2 groups are already set and a new group is assigned as Priority 1 or Priority 2, the previously assigned group will change to
SCAN DIS The radio is not programmed to scan.
43