Tyco LPE-200 manual

Press the M key again then use the <,

>keys to scroll through the list of prestored numbers.

2.Press and release the PTT button. When the

radio is clear to transmit, turns on, turns off and the channel access tone sounds. Line one shows the accompanying name selected from the list of stored numbers. The message *PHONE* displays on line two. The radio then automatically transmits the programmed number stored in the special call queue.

3.A telephone ring will be heard from the speaker. When someone answers the phone, press the PTT button and speak into the microphone. Release the PTT button to listen to the callee. Unsuccessful interconnect signaling returns the radio to the normal receive mode and the number remains displayed until the special call is cleared or the time-out expires or another group or system is selected. Terminate a call by pressing the CLEAR/MONITOR button.

NOTE

In half-duplex mode, only one person may talk at a time. The radio PTT button needs to be pressed in order to communicate to the individual called and released for the individual called to be heard.

4.To terminate the call, momentarily press the CLEAR/MONITOR button.

56