Tyco LPE-200 manual Pre-Programmed Keypad Key, Individual Calls

Pre-Programmed Keypad Key

Press the pre-programmed key and the SYSC ON or SYSC OFF display message is displayed for two seconds to show the new state.

INDIVIDUAL CALLS

Receiving And Responding To An Individual Call (Trunked Mode Only)

When the radio receives an individual call (a call directed only to the user's radio), it unmutes on the

assigned working channel and turns on . The first line on the display shows the logical ID number of the unit sending the message, or the associated name if the ID number is found in the individual call list. The radio can be programmed to ring when an individual call is received. If enabled, the ring begins five seconds after the caller unkeys and will continue until the PTT button, the CLEAR/MONITOR button or the individual call mode is entered.

NOTE

The volume of the ring is adjustable through the volume control levels.

If a response is made by pressing the PTT to the call prior to the programmed call-back time-out, the call will automatically be directed to the originating unit. If a response is not made before the call-back time-out, the radio will return to normal receive display, and *WHC* will appear on the first line of the LCD.

50