Tyco LPE-200 manual Error Messages, Universal Device Connector UDC, Alert Tones, Call Originate

Page 26

Error Messages

If either of the following error messages is displayed, the radio was either programmed incorrectly or needs servicing:

	DSP ERR			DSP ERR	or	DIG V ERR
	ERR=XXXX
	(Power Up only)

UNIVERSAL DEVICE CONNECTOR (UDC)

The Universal Device Connector (UDC) provides connections for external accessories such as a headset or a speaker-microphone. When the radio is locked in a vehicular charger the UDC provides the audio and control connections between the radio and the vehicular charger. The UDC is also used to program and service the radio.

ALERT TONES

The LPE-200 radio also provides audible alert tones or "beeps" to indicate the various operating conditions. These alert tones can be enabled or disabled through programming.

Call Originate

A short mid-pitched alert tone sounds after keying the radio (Push-To-Talk button is pressed). This indicates the radio has been assigned a working channel or that the radio is transmitting on a conventional channel and voice communication may begin immediately.

26

Image 26

Contents EDACS/ProVoice LPE-200 Page Table of Contents Telephone Interconnect Digital Voice Operation Charging the Battery Pack Rechargeable Battery Pack Disposal Introduction User Interface LPE-200 Radio Scan Model Shown LPE-200 Radio System Model Shown Top, Back and Left Panel Views System GROUP/ Channel Knob Power ON-OFF Volume Knob Buttons and KnobsEMERGENCY/ Home Button Option Clear Monitor Button PUSH-TO Talk Button PTT Keypad Keypad Scan ModelStandard Functions Scan Model System ModelButton and Keypad Reassignment Button and Key Assignments Display Display Radio Status IconsPage Page Messages SYS BusySysc on Rxemer Alert Tones Error MessagesUniversal Device Connector UDC Call OriginateSystem Busy Trunked Mode Only Call Queued Trunked Mode OnlyAutokey Trunked Mode Only Call Denied Trunked Mode OnlyLow Battery Alert Transmit Lockout Carrier Control TimerLow Battery Warning Key Press AlertOperation Turning on the Radio SYSTEM/GROUP/CHANNEL Selection System SelectionPage Group or Channel Selection Page Page Trunked Mode Operation Receiving a Group CallPage Sending a Group Call Conventional Failsoft Emergency OperationReceiving an Emergency Call Declaring an Emergency CallScanning Trunked Groups Turning Scan On and OffAdding Groups to a Scan List Scan Model Radios Page System Model Radios Deleting Groups from a Scan List Scan Model Radios Nuisance Delete Priority System Scan Scanning Trunked SystemsWide Area System Scanning When Wide Area System Scan Is Enabled When ProSound/ProScan Is EnabledProSound ProScanMenu Selection Pre-Programmed Keypad Key Individual CallsPage System Model Direct Dialing of Individual Calls System Model only Call Storage Lists Receiving a Telephone Interconnect Call Trunked Mode Only Telephone Interconnect CallsPage Direct Dialing of Phone Calls System Model only Dtmf Overdial / Conventional Mode Telephone Interconnect Scan Radio System Radio Programmable Entries STATUS/MESSAGE Operation Status OperationMessage Operation Dynamic Regroup OperationEmergency Operation Macro KEY Operation MenuPress M Press M Feature Display Parameter Comment Setting Menu Item InformationGROUP/ Channel Clear Mode Digital Voice OperationDigital Mode Private Mode DtmfDisplaying the Currently Used Cryptographic Key Number System Encryption KeyGroup/Channel Encryption Key Key Zero Private Operation Receiving an Encrypted CallTransmitting an Encrypted Call Scanned Group Calls Yes Portable Data DisplaysData OFF Operation Data on OperationScan Lockout Mode Exiting Data CallsData Lockout Mode Conventional OperationReceiving a Call Sending a CallAdding Channels to a Scan List Deleting Channels from a Scan List Turning Scan on Turning Scan OFFOperating Rules and Regulations Page Battery Packs Charging the Battery Pack Operating TipsPage Nickel Metal Hydride NiMH Battery Pack Disposal Rechargeable Battery Pack DisposalNickel Cadmium NiCd Battery Pack Disposal Installing the Battery PackInstalling and Removing Battery Pack Removing the Battery PackIntrinsically Safe Usage Battery Packs Accessories Glossary CCTGroup. Trunked Mode only System Scan Programmed feature to scan monitor activity Warranty COMBattery Warranty OPERATOR’S Radio Setup 100Emergency Numbers 101COM Wireless Systems