Scan Model
1.To select a
Press M. 
turns on. Scroll through the list of stored phone numbers using the < or >
key until the desired number is displayed. Press M.
2.Press the PTT button; when the radio is clear to
transmit 
turns on, 
turns off and the channel access tone sounds. Line one shows the called individual's name or LID. The message *INDV* displays on line two.
Direct Dialing of Individual Calls (System Model only)
The following procedures describes how to initiate and complete a direct dialed individual call.
1.If the individual call ID is not stored in the pre- stored list of call ID's but the individual unit ID is known, it can be entered directly from the keypad.
Note: The ID of the last individual call made can be recalled by pressing # then the OPTION button.
53