Tyco LPE-200 manual Dtmf, Private Mode

Page 72

DTMF

The overdial DTMF tones are not available while in the Digital Mode.

Private Mode

The private modes allow the radio to transmit encrypted messages and receive clear or private transmissions. The radio transmits private if the group/channel is programmed for private operation and forced operation is pre-programmed. If autoselect operation is pre-programmed and the radio is in the private mode, the radio transmits in the mode of the received call if the hang time is active. If no hang time is active, the radio transmits private.

Cryptographic keys are transferred to the radio using a cryptographic Keyloader. Up to seven (7) different cryptographic keys, numbered 1-7, can be transferred from a Keyloader and stored in the radio. An individual key is automatically selected on a per- group/channel basis according to the radio programming. Groups and channels within the digital system can be programmed for keys 1-7 (private). Up to 8 banks of 7 keys can be stored for private systems. The bank is specified per system.

When operating on a group or channel programmed for private mode, all transmissions are private transmissions and the radio receives clear

and private signals. The status icon display turns on when the private mode is enabled. If the selected group or channel is programmed for autoselect capability, the mode may be toggled between private

72

Image 72
Contents EDACS/ProVoice LPE-200 Page Table of Contents Telephone Interconnect Digital Voice Operation Charging the Battery Pack Rechargeable Battery Pack Disposal Introduction User Interface LPE-200 Radio Scan Model Shown LPE-200 Radio System Model Shown Top, Back and Left Panel Views System GROUP/ Channel Knob Power ON-OFF Volume Knob Buttons and KnobsEMERGENCY/ Home Button Option Clear Monitor Button PUSH-TO Talk Button PTT Keypad Keypad Scan ModelStandard Functions Scan Model System ModelButton and Keypad Reassignment Button and Key Assignments Display Display Radio Status IconsPage Page Messages SYS BusySysc on Rxemer Error Messages Universal Device Connector UDCAlert Tones Call OriginateCall Queued Trunked Mode Only Autokey Trunked Mode OnlySystem Busy Trunked Mode Only Call Denied Trunked Mode OnlyCarrier Control Timer Low Battery WarningLow Battery Alert Transmit Lockout Key Press AlertOperation Turning on the Radio SYSTEM/GROUP/CHANNEL Selection System SelectionPage Group or Channel Selection Page Page Trunked Mode Operation Receiving a Group CallPage Sending a Group Call Conventional Failsoft Emergency OperationReceiving an Emergency Call Declaring an Emergency CallScanning Trunked Groups Turning Scan On and OffAdding Groups to a Scan List Scan Model Radios Page System Model Radios Deleting Groups from a Scan List Scan Model Radios Nuisance Delete Scanning Trunked Systems Wide Area System ScanningPriority System Scan When Wide Area System Scan Is Enabled When ProSound/ProScan Is EnabledProSound ProScanMenu Selection Pre-Programmed Keypad Key Individual CallsPage System Model Direct Dialing of Individual Calls System Model only Call Storage Lists Receiving a Telephone Interconnect Call Trunked Mode Only Telephone Interconnect CallsPage Direct Dialing of Phone Calls System Model only Dtmf Overdial / Conventional Mode Telephone Interconnect Scan Radio System Radio Programmable Entries STATUS/MESSAGE Operation Status OperationMessage Operation Dynamic Regroup OperationEmergency Operation Macro KEY Operation MenuPress M Press M Feature Display Parameter Comment Setting Menu Item InformationGROUP/ Channel Clear Mode Digital Voice OperationDigital Mode Private Mode DtmfDisplaying the Currently Used Cryptographic Key Number System Encryption KeyGroup/Channel Encryption Key Key Zero Private Operation Receiving an Encrypted CallTransmitting an Encrypted Call Scanned Group Calls Yes Portable Data DisplaysData OFF Operation Data on OperationScan Lockout Mode Exiting Data CallsData Lockout Mode Conventional OperationReceiving a Call Sending a CallAdding Channels to a Scan List Deleting Channels from a Scan List Turning Scan on Turning Scan OFFOperating Rules and Regulations Page Battery Packs Charging the Battery Pack Operating TipsPage Rechargeable Battery Pack Disposal Nickel Cadmium NiCd Battery Pack DisposalNickel Metal Hydride NiMH Battery Pack Disposal Installing the Battery PackInstalling and Removing Battery Pack Removing the Battery PackIntrinsically Safe Usage Battery Packs Accessories Glossary CCTGroup. Trunked Mode only System Scan Programmed feature to scan monitor activity Warranty COMBattery Warranty OPERATOR’S Radio Setup 100Emergency Numbers 101COM Wireless Systems