Tyco LPE-200 manual Scanning Trunked Systems, Wide Area System Scanning, Priority System Scan

Page 46

SCANNING TRUNKED SYSTEMS

The radio can be programmed with the following

System Scan features. These features are automatically enabled upon radio power up. A key or menu option is also defined to allow the System Scan features to be toggled during radio operation. This is covered in the MENU SELECTION and PRE- PROGRAMMED KEYPAD KEY sections. The System Scan state will be maintained through system changes but will default to ON at power up.

Wide Area System Scanning

The LPE-200 radio may be programmed for wide area system scan operation for roaming across mobile systems. Upon the loss of the currently selected system's control channel, radios may be programmed to automatically scan the control channels of other systems. If a new control channel is found, the radio will switch to the new system and sound an alert tone.

Priority System Scan

The radio may also be programmed for Priority System Scan. (In order for this feature to work properly, the control channel of the Priority System must be located on channel one, unless you are using the ProSound/ProScan algorithm). The priority system is the desired or preferred system. While receiving the control channel of the selected system, periodically the radio will leave the selected system and search for the control channel of the priority system at a programmable rate defined by the value in the Priority Scan Time control, (unless the

46

Image 46

Contents EDACS/ProVoice LPE-200 Page Table of Contents Telephone Interconnect Digital Voice Operation Charging the Battery Pack Rechargeable Battery Pack Disposal Introduction User Interface LPE-200 Radio Scan Model Shown LPE-200 Radio System Model Shown Top, Back and Left Panel Views System GROUP/ Channel Knob Power ON-OFF Volume Knob Buttons and KnobsEMERGENCY/ Home Button Option Clear Monitor Button PUSH-TO Talk Button PTT Keypad Keypad Scan ModelStandard Functions Scan Model System ModelButton and Keypad Reassignment Button and Key Assignments Display Display Radio Status IconsPage Page Messages SYS BusySysc on Rxemer Alert Tones Error MessagesUniversal Device Connector UDC Call OriginateSystem Busy Trunked Mode Only Call Queued Trunked Mode OnlyAutokey Trunked Mode Only Call Denied Trunked Mode OnlyLow Battery Alert Transmit Lockout Carrier Control TimerLow Battery Warning Key Press AlertOperation Turning on the Radio SYSTEM/GROUP/CHANNEL Selection System SelectionPage Group or Channel Selection Page Page Trunked Mode Operation Receiving a Group CallPage Sending a Group Call Conventional Failsoft Emergency OperationReceiving an Emergency Call Declaring an Emergency CallScanning Trunked Groups Turning Scan On and OffAdding Groups to a Scan List Scan Model Radios Page System Model Radios Deleting Groups from a Scan List Scan Model Radios Nuisance Delete Wide Area System Scanning Scanning Trunked SystemsPriority System Scan When Wide Area System Scan Is Enabled When ProSound/ProScan Is EnabledProSound ProScanMenu Selection Pre-Programmed Keypad Key Individual CallsPage System Model Direct Dialing of Individual Calls System Model only Call Storage Lists Receiving a Telephone Interconnect Call Trunked Mode Only Telephone Interconnect CallsPage Direct Dialing of Phone Calls System Model only Dtmf Overdial / Conventional Mode Telephone Interconnect Scan Radio System Radio Programmable Entries STATUS/MESSAGE Operation Status OperationMessage Operation Dynamic Regroup OperationEmergency Operation Macro KEY Operation MenuPress M Press M Feature Display Parameter Comment Setting Menu Item InformationGROUP/ Channel Clear Mode Digital Voice OperationDigital Mode Private Mode DtmfDisplaying the Currently Used Cryptographic Key Number System Encryption KeyGroup/Channel Encryption Key Key Zero Private Operation Receiving an Encrypted CallTransmitting an Encrypted Call Scanned Group Calls Yes Portable Data DisplaysData OFF Operation Data on OperationScan Lockout Mode Exiting Data CallsData Lockout Mode Conventional OperationReceiving a Call Sending a CallAdding Channels to a Scan List Deleting Channels from a Scan List Turning Scan on Turning Scan OFFOperating Rules and Regulations Page Battery Packs Charging the Battery Pack Operating TipsPage Nickel Metal Hydride NiMH Battery Pack Disposal Rechargeable Battery Pack DisposalNickel Cadmium NiCd Battery Pack Disposal Installing the Battery PackInstalling and Removing Battery Pack Removing the Battery PackIntrinsically Safe Usage Battery Packs Accessories Glossary CCTGroup. Trunked Mode only System Scan Programmed feature to scan monitor activity Warranty COMBattery Warranty OPERATOR’S Radio Setup 100Emergency Numbers 101COM Wireless Systems