Philips AJ3130/05 manual Setting the Clock Radio, Quartz Clock, Clock Display

SETTING THE CLOCK RADIO

QUARTZ CLOCK

(/11/14 versions only. See typeplate inside the battery compartment.)

The clock contains a quartz crystal and runs independent of the power supply frequency to ensure maximum accuracy.

CLOCK DISPLAY

The time is displayed using the 24-hour clock system. Important! When setting the clock or alarm time, for accurate hour and minute adjustment always make sure you press the HR and MIN keys separately and not simultaneously.

1.Adjust the clock control to SET TIME.

2.Press and hold down the HR or MIN key to set and adjust the hours and minutes respectively:

•With your finger held down on HR, the hour increases as a digit from 0 to 23.

•With your finger held down on MIN, the minutes increases as a digit from 00 to 59.

3.Release the HR or MIN key when you have reached the correct time.

4.To safeguard the clock time from being accidentally adjusted, turn the clock control to CLOCK.

RADIO

You can use the clock radio solely as a radio.

1.Adjust the RADIO switch to ON.

2.Select your waveband using the BAND switch.

3.Use TUNING to find your radio station.

4.Adjust the sound with the VOLUME control.

5.To turn off the radio, adjust RADIO to OFF.

To improve radio reception:

•For FM, extend and position the pigtail to obtain optimum reception.

•For MW, the set is provided with a built-in aerial which to function best should be placed on a non-metallic surface e.g. wood, plastic. Direct the MW aerial by adjusting the position of your clock radio.

English

7