COBY electronic TFTV791 instruction manual Safety Notices

English

12.Grounding or Polarization: This product may be equipped with a polarized alternating-current line plug that has one blade wider than the other. This plug will only fit into the power outlet in one direction. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the direction of the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13.Power-Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and at the point which they exit from the product.

14.Protective Attachment Plug: The product may be equipped with an attachment plug with overload protection. This is a safety feature. See the operating instructions for replacement

or directions to reset the protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug that has the same overload protection as the original plug as specified by the manufacturer.

15.Outdoor Antenna Grounding: If an outside

antenna is connected to the product, be sure the antenna system is grounded so as

to provide some protection against voltage

surges and built-up static charges. Article 810 of the National Electrical Code, ANS/

NFPA 70 provides information with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conduc-

tors, location of antenna-discharge unit, connection

to grounding electrodes, and requirements for the ground-

ing electrode (see figure).

Page 28 Safety Notices