Makita XSC01Z, XSC01M instruction manual Specifications, English Original instructions

Page 2

ENGLISH (Original instructions)

SPECIFICATIONS

Model

 

XSC01

Blade diameter

 

136 mm (5-3/8")

Max. Cutting depth

 

51 mm (2")

No load speed (RPM)

 

3,600 /min

Overall length

 

348 mm (13-3/4")

Net weight

2.3 kg (5.1 lbs)

 

2.6 kg (5.7 lbs)

Rated voltage

 

D.C. 18 V

Standard battery cartridges

BL1815N

 

BL1830 / BL1840

Due to our continuing program of research and development, the specifications herein are subject to change without notice.

Specifications and battery cartridge may differ from country to country.

Weight, with battery cartridge, according to EPTA-Procedure 01/2003

GEA006-2

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

9.If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.

Personal Safety

10.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

11.Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

12.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

13.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

14.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

15.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves

2

Image 2
Contents XSC01 Specifications English Original instructionsCordless Metal Cutter Safety Warnings Kickback causes and related warnings Important Safety Instructions For Battery Cartridge Tips for maintaining maximum battery lifeFunctional Description Installing or removing battery cartridgeAdjusting depth of cut SightingRemoving or installing blade AssemblySwitch action Electric brakeHex wrench storage Rip fence guide rule AccessoryOperation Inspecting blade MaintenanceOptional Accessories Replacing carbon brushesMakita Limited ONE Year Warranty Warranty PolicySécurité personnelle Français Mode d’emploi originalSpécifications Liés à la présence de poussière dans lair Consignes DE Sécurité Pour LA Scie À Métaux Sans FIL Causes du recul et avertissements connexesConservez CE Mode Demploi Pour LA BatterieIndicateur rouge Installation ou retrait de la batterieDescription DU Fonctionnement BoutonInterrupteur ViséeRéglage de la profondeur de coupe Frein électriqueUtilisation Retrait ou installation de la lameAssemblage Allumage de la lampeGarde parallèle règle de guidage Accessoire EntretienInspection de la lame Accessoires EN OptionRemplacement des charbons Trait de limite dusureGarantie Limitée D’UN AN Makita Politique de garantieSeguridad eléctrica EspecificacionesEspañol Instrucciones originales Eléctricas que tengan conexión a tierra puestaMantenimiento y uso de la herramienta eléctrica Como resultado heridas personales gravesReduce los riesgos relacionados con el polvo Causas de los retrocesos y advertencias relacionadas Peligro Guarde Estas InstruccionesEl protector inferior utilizando el mango retráctil Batería Descripción DEL FuncionamientoInstalación o desmontaje del cartucho de Consejos para alargar al máximo la vida útil de la bateríaAccionamiento del interruptor Guía visualAjuste de la profundidad de corte AdvertenciaFreno eléctrico MontajeExtracción e instalación del disco cortador Encendido de la lámparaOperación Guía lateral regla guía accesorioInspección del disco MantenimientoAccesorios Opcionales Política de garantía Page Advertencia