Milwaukee 6080-20 Specific Safety Rules Sanders and Grinders, Functional Description, Spindle

SPECIFIC SAFETY RULES - SANDERS AND GRINDERS

1.Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments.

2.Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.

3.Make sure all wheel flanges and other mounting hardware are in good condition and are always used properly. Defective or missing parts may damage the wheels and other accessories. Always use mounting hardware supplied with the tool.

4.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

5.Keep hands away from all cutting edges and moving parts.

6.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

7.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Symbology Specifications

Double Insulated

Volts Alternating Current/ Direct Current

Amps

No Load Revolutions per Minute (RPM)

Underwriters Laboratories, Inc.

Canadian Standards Association

Mexican Safety Standards

					Spindle
Cat.	Volts	D.I.* or		No Load	Thread	Wheel	Min. Wheel
No.	AC/DC	Grounded	Amps	RPM	Size	Size	RPM Rating
Sanders
6080-20	120	D.I.	15	6000	5/8"-11	7"/9"	6500
6081-20	120	Grounded	15	6000	5/8"-11	7"/9"	6500
6082-20	120	D.I.	15	6000	5/8"-11	7"/9"	6500
Grinders
6086-20	120	D.I.	15	6000	5/8"-11	9"	6500
6088-20	120	D.I.	15	6000	5/8"-11	7"	6500
6089-20	120	D.I.	15	6000	5/8"-11	9"	6500

*Double Insulated

FUNCTIONAL DESCRIPTION

1.Rear handle

2.Trigger

3.Lock-on button (select models)

4.Handle release button (select models)

5.Side handle

6.Wheel guard (select models)

7.Grinding wheel (select models)

8.Guard adjustment lock lever (select models)

9.Spindle lock button

10.Side handle socket

8

7

5

6

1

2

3

4(on bottom)

9

10

page 3