12.Replace the outlet tube and tighten nuts.
13.Replace shrouds and console.
14.Perform the
To Replace Regulator
1.Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section.
2.Unplug outfit.
3.Remove the regulator ring and remove the console cover. gauge and quick connect. Orient outlet pressure gauge to read correctly. Tighten quick connect with wrench.
Regulator | Cover |
Ring |
|
4.Using an adjustable wrench loosen pressure relief tube nut at air tank and pressure switch.
5.Using an adjustable wrench, rotate the pressure switch assembly as shown.
Regulator Tank
Outlet Pressure
PressureGauge
Gauge
Quick
Connect
6.Remove the outlet pressure gauge, tank pressure gauge, and quick connect (if equipped) from the regulator.
7.Remove the regulator.
8.Apply pipe sealant tape to the nipple.
9.Assemble the regulator and orient as shown.
NOTE: Arrow indicates flow of air. Make sure it is pointing in the direction of air flow.
Regulator
Arrow
10.Reapply pipe sealant to outlet pressure gauge, tank pressure gauge, and quick connect.
11.Reassemble outlet pressure gauge, tank pressure gauge, and quick connect. Orient outlet pressure gauge and tank pressure gauge to read correctly. Tighten quick connect with wrench.
12.Rotate pressure switch assemble into correct position.
13.Replace console cover and regulator ring.
19- ENG | D24563 |