SM 1619X04464
* ExTENSION PLATE
When sanding in extremely tight areas, such as louvered panels, remove the
backing pad and attach the extension plate provided (Fig. 5).
PAD/PLATE
UNLOCK
BUTTON
BACKING
PAD
* EXTENSION PLATE | FIG. 5 |
|
ATTACHING THE 3-POSITION ATTACHMENT SUPPORT PLATE
Your sander also features a
Press the pad/plate unlock button and pull the backing pad free of the sander. Engage rear of
ATTACHING ACCESSORIES
1.Insert round portion of the attachment into the mounting boss from the side of pad (Fig. 6).
NOTE: Round portion of the attachment must be fully inserted into the mounting boss in order for the rear end of attachment plate to clear adjustment rail (Fig. 6).
FIG. 6
ROUND PORTION
OF THE
ATTACHMENT
* ATTACHMENT
ATTACHMENT SUPPORT
PLATE
MOUNTING
BOSS
2.Swing attachment in direction of arrow C flat against pad until rear portion of attachment slides underneath the the adjustment rail (Fig. 7). If the attachment will not swing in
direction of arrow. Push attachment further under the mounting boss.
3. Lift up on release tab, swing attachment to notch and release tab.
To change position of attachment, simply lift release tab, swing attachment to desired notch and release tab to secure attachment (Fig. 8).
FIG. 7 | REAR END OF |
| ATTACHMENT |
| PLATE |
ADJUSTMENT |
|
RAIL |
|
ADJUSTMENT
RAIL
FIG. 8