Skil 2410 manual Battery Disposal, LITHIUM-ION Batteries, Battery Removal Instructions

BM 1619X01525 06-06 6/14/06 11:30 AM Page 6

Battery Disposal

!WARNING Do not attempt to disas- semble the battery or

remove any component projecting from the battery terminals. Fire or injury may result. Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting.

LITHIUM-ION BATTERIES

If equipped with a lithium-ion battery, the battery must be collected, recycled or disposed of in an environmentally sound manner.

“The EPA certified RBRC Battery Recycling Seal on the lithium-ion (Li-ion) battery indicates Robert Bosch Tool Corporation is voluntarily participating in an industry

program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alterative to placing used Li-ion batteries into the trash or the municipal waste stream, which may be illegal in your area.

Please call 1-800-8-BATTERY for information on Li-ion battery recycling and disposal bans/restrictions in your area, or return your batteries to a Skil/Bosch/Dremel Service Center for recycling. Robert Bosch Tool Corporation’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.”

Battery Disposal

BATTERY REMOVAL INSTRUCTIONS

Run motor until battery is completely discharged before attempting to remove battery from your tool.

1.Remove the seven (7) housing screws with a flat blade screwdriver.

2.Remove housing cover by lifting upward from front end of tool.

3.Disconnect lead wires from switch.

4.Wrap heavy insulating tape around battery terminals or enclose in a sealable plastic bag to prevent possible shorting.

5.Dispose of battery through your local waste removal authority or a Skil Service Center.

-6-