Sterling Plumbing 822.00247.00 specifications Viewing System Status, Name Description

Page 19

Viewing System Status

The station and pump status screen (Shown below) can be viewed by pressing the F2 key on the controller keypad.

Figure 3: Status Screen

This screen will show whether stations 1-9 and the pump (shown in the bottom right of the screen- “P1”) are Ready or Offline. For a list of additional station and pump status names and their description which may be displayed on this screen, see below.

Figure 4: Station Status Names & Descriptions

	Name	Description
	OFFLINE	Station is disabled or not installed.
	READY	Normal idle condition.
	DEMAND	Station is in demand, waiting to convey.
	CONVEY	Convey to station is in progress.
	UNLOAD	Convey is complete, station is now unloading.
	NOCONV	Station has a no convey alarm.
	PURGE	Station convey is complete – lines are being purged.
	HIVAC	High vacuum alarm.
Figure 5: Pump Status Names & Descriptions

	Name	Description
	OFFLINE	Pump is disabled.
	READY	Pump is idle and off.
	IDLE	Pump is idle and running.
	CONVEY	Pump is conveying or purging.
	HIVAC	High vacuum alarm.
	PMP FLT	Pump Verify alarm.
	GEN FLT	User input alarm.
	FLTR CAN	Filter can limit switch alarm.

Note: Pressing F1 while this screen is active will turn On or Off the conveying system.

Press F6 to return to the Main Menu.

1 –Pump 9-Station Controller

Chapter 3: Installation

18 of 38

Image 19

Contents SCC 1-Pump 9-Station Controller Parts and Service Department If the Shipment is Not Complete Shipping InformationUnpacking and Inspection Event of Shipping DamageReturns Warranty ReturnsCredit Returns Table of Contents Configurable Settings How to Use This Manual SafetySafety Symbols Used in this Manual Controller Safety Tags Description Wear Safety Glasses and Work Gloves General Responsibility ResponsibilityReporting a Safety Defect Maintenance ResponsibilityOperator Responsibility Models Covered in This Manual Functional DescriptionGeneral Description Controller Features Standard FeaturesMechanical Features Electrical FeaturesFail Safe Operation Optional FeaturesSafety Devices and Interlocks Safety Circuit StandardsSafety Device Lock-Outs Mounting the Control Panel InstallationMaking Control Panel Power Drop Wiring Connections UncratingConnecting the Control Panel to the Pump Package Connecting the Control Panel to Vacuum HoppersBasic Menus and Setup of Controller SetupActivating and Deactivating the System Name Description Viewing System StatusInitial Station Setup Screen Station SetupController Keypad Entering Values Into Controller FieldsSecond Station Setup Screen Third Station Setup Screen Initial Pump Setup Screen Pump SetupSecond Pump Setup Screen Third Pump Setup Screen Initial System Setup Screen System SetupThird System Setup Screen Second System Setup ScreenStarting and Stopping the System AlarmsOperation OverviewFilter Can Pump FaultGeneral Fault All FaultsMaintenance Options for Station Setup Configurable SettingsOptions for Pump Setup General Troubleshooting TroubleshootingPump Alarms Station AlarmsAppendix WarrantyWarranty Specifications Warranty RestrictionsOptional Components Warranty LiabilitiesCustomer Responsibilities Spare Parts List Drawings and DiagramsTechnical Assistance Contact Information Controller Identification Serial Number Tag