Sterling Plumbing 822.00247.00 specifications Second Station Setup Screen

Page 22

Second Station Setup Screen

Once the settings have been entered into the initial Station Setup Screen, press F3 to access the next set of configurable station settings. The second station setup screen (Figure 8) will be shown.

Figure 8: Second Station Setup Screen

This screen will allow you to set/activate the following features:

•Purge Time – this is the length of time allowed for material to be cleaned out of the system. Purge time duration is displayed in seconds and can be set from 1-999.

•Purge F2- this allows you to enable or disable the purge cycle by pressing the F2 button on the keypad.

•CL Loop F4 – this allows you to enable or disable the closed loop feature for this station by pressing the F4 button on the keypad.

Once the values and settings have been entered, the operator can choose to do the following:

•Enter the settings from this screen for the next station in sequence (Press F5 while in this screen)

•Enter additional settings for this station in the third setup screen (Press F3).

•Return to the Main Menu (Press F6).

1 –Pump 9-Station Controller

Chapter 3: Installation

21 of 38

Image 22

Contents SCC 1-Pump 9-Station Controller Parts and Service Department Event of Shipping Damage Shipping InformationUnpacking and Inspection If the Shipment is Not CompleteReturns Warranty ReturnsCredit Returns Table of Contents Configurable Settings How to Use This Manual SafetySafety Symbols Used in this Manual Controller Safety Tags Description Wear Safety Glasses and Work Gloves Responsibility General ResponsibilityReporting a Safety Defect Maintenance ResponsibilityOperator Responsibility Models Covered in This Manual Functional DescriptionGeneral Description Electrical Features Standard FeaturesMechanical Features Controller FeaturesSafety Circuit Standards Optional FeaturesSafety Devices and Interlocks Fail Safe OperationSafety Device Lock-Outs Uncrating InstallationMaking Control Panel Power Drop Wiring Connections Mounting the Control PanelConnecting the Control Panel to Vacuum Hoppers Connecting the Control Panel to the Pump PackageBasic Menus and Setup of Controller SetupActivating and Deactivating the System Viewing System Status Name DescriptionStation Setup Initial Station Setup ScreenEntering Values Into Controller Fields Controller KeypadSecond Station Setup Screen Third Station Setup Screen Pump Setup Initial Pump Setup ScreenSecond Pump Setup Screen Third Pump Setup Screen System Setup Initial System Setup ScreenSecond System Setup Screen Third System Setup ScreenOverview AlarmsOperation Starting and Stopping the SystemAll Faults Pump FaultGeneral Fault Filter CanMaintenance Configurable Settings Options for Station SetupOptions for Pump Setup Troubleshooting General TroubleshootingStation Alarms Pump AlarmsWarranty Restrictions WarrantyWarranty Specifications AppendixOptional Components Warranty LiabilitiesCustomer Responsibilities Drawings and Diagrams Spare Parts ListController Identification Serial Number Tag Technical Assistance Contact Information