Graco 334135B Appendix B LCM Run Screen Overview, Splash Screen Operator Mode Screen

Appendix B - LCM Run Screen Overview

Appendix B - LCM Run Screen Overview

Splash Screen Operator Mode Screen

This screen is activated during a boot up condition. The splash screen will only be present approximately for five seconds.

Disable Mode Screen

When the system is in this mode, all outputs are dis- abled. This mode is activated in the bootup situation, or if the user presses the System Shut-Down Key. To exit this mode, the user simply needs to press the Power On icon softkey.

Shot Mode Screen

This mode is the dispensing mode where the user can define a shot amount by defining the percentage of stroke for the dispense operation. When dispensing in this mode, the machine will produce the same amount of material for each dispense. To dispense out of this mode, the user needs to momentarily press the dis- pense key, or press an optional footswitch.

This mode is the dispensing mode where the dispense amount is dictated by the duration the user is requesting the dispense. To dispense in this mode, the user can either press and hold the dispense key, or press and hold an optional footswitch. If the user releases the footswitch or dispense key, the dispense operation will terminate, and the pump will return to the retract position unconditionally.

Mode Selection Programming Screen

This programming mode is entered by pressing the mode select designation soft key option, from any of the three possible run mode screens. When activated, the user can select between Shot, Manual and Maintenance modes. The highlighted graphics in the top left portion of the display will indicate the current selection.

62 334135B